Page 1
INTRODUCTION
Thank you for choosing ARC Audio’s KAR Series
line of hi-performance mobile audio products. We
hope you enjoy your experience with all our product
and we welcome any questions or comments you
may have.
DIRECT REPLACEMENT
s
KAR Series
KAR4022 KAR5022
KAR6022 KAR4622
KAR6932 KAR5722
Installation Manual
ARC Audio speakers are designed to fit most
applications in the original stock location without
modification. Some vehicles may require minor
removal of material and relocation of mounting holes
to achieve a proper fit.
A WORD ON DISTORTION
Most speaker damage occurs as a result of amplifier
distortion also known as “Clipping”. Clipping occurs
when an amp is driven beyond its maximum rated
output. This kind of distortion can be hard to hear
unless you know what to listen for. Any time you hear
a harsh ear piercing sound at high volume your amp
is probably clipping.
1
Page 2
KAR6022
Diameter
Max Power
Nor.
Sensitivity
Frequency
response
IMP.
Power
KAR4022
Diameter
Max Power
Nor. Power
Sensitivity
Frequency
response
IMP.
KAR6932
Diameter
Max Power
Nor. Power
Sensitivity
Frequency
response
IMP.
Specifications
6 ½”
86db
70 watts Max Power
35 watts Nor. Power
60hz
20Khz
4 Ohm
4”
86db
40 watts Max Power
20 watts Nor. Power
110hz
20Khz
4 Ohm
6” X 9”
86db
110watts Max Power
55 watts Nor. Power
50hz
20Khz
4 Ohm
CAUTION:
KAR5022
-
Diameter
Sensitivity
Frequency
response
IMP.
86db
KAR4622
-
Diameter
Sensitivity
Frequency
response
IMP.
86db
KAR5722
Diameter
Sensitivity
-
Frequency
response
IMP.
86db
5 ¼”
50 watts
25 watts
80hz
20Khz
4 Ohm
4” X 6”
50 watts
25 watts
90hz
20Khz
4 Ohm
5” X 7”
70 watts
35 watts
65hz
20Khz
4 Ohm
Please check the suitability of the installation
location before you begin. Do not cut any of the
car’s structure. Pay attention to the mechanism of
the window and door.
If you do not have experience with automotive
electrical and mechanical systems contact a
professional installer. Paying a qualified installer is
almost always cheaper then paying a dealership to
repair your car.
THE INSTALL
ARC Audio’s KAR Series
designed to fit most vehicles without modification.
Some locations will require cutting to obtain a proper
fit.
1.
Remove the interior panel to expose the
stock speaker. It may take some time to find
and remove all the clip and screws to
remove this panel.
2.
Remove the stock speaker and disconnect it
from the wiring.
3.
Check the fit with the new speaker. Make
sure that all the door and window hardware
will clear the larg
coaxial
er magnet.
speakers are
2
3
Page 3
4.
You may have to trim some material from
around or behind to speaker.
5.
Connect the stock speaker wires to the new
speaker.
touch it to the terminals of the stock
speaker. If the cone moves out the + of the
bat
tery is on the + of the speaker. If you
noted the color of wire connected to this
terminal then you now the + speaker wire.
6.
Install the speaker in the location. You may
have to drill new holes to secure the
speaker.
7.
Reinstall the panel. Congratulations you
finished and ready to enjoy your new
system.
Tip: Use a 9V battery and quickly
LIMITED WARRANTY
Before shipping this product back for service call for a Return Authorization
number. This number must be clearly marked on the outside of the box.
Terms & Conditions: ARC Audio warranties the unit to be free of any material defects
or defects in workmanship for a period of one year and will repair this unit or any part
thereof only if it proves to be defective as a result of normal use.
warranty service on this product, the owner must promptly register by filling in and
mailing the Warranty Registration Card.
Our obligation under this warranty is limited to repairing only the defective components
of the unit thereof when it is returned, shipping prepaid, to ARC Audio.
This warranty is to be considered void if the unit has been tampered with, connected
contrary to the installation instructions in the owner’s manual, altered, damaged by
improper input voltages or polarity, defaced, or treated in a negligent manner.
All returns must be sent freight prepaid, along with $10.00 to cover return shipping and
handling.
Out of warranty service is available after the warranty expires. Cost of repair is based on
current repair labor rates, plus the cost of shipping and handling. When returning for
repair, pack the unit securely and send prepaid and insured to the address below. ARC
Audio is not responsible for damage incu
rred during shipping.
In order to receive
If you have any Question about this product please
call ARC Audio Technical Service:
209-543-8706
4
For warranty and non-warranty repairs, send to:
ARC Audio
4719 Green Leaf Cr. #4
Modesto CA, 95356
___________________________________________
Page 4
This document was created with Win2PDF available at http://www.daneprairie.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
Loading...