ARC Audio KAR4022, KAR6932, KAR5022, KAR6022, KAR5722 User Manual
...
INTRODUCTION
Thank you for choosing ARC Audio’s KAR Series
line of hi-performance mobile audio products. We
hope you enjoy your experience with all our product
and we welcome any questions or comments you
may have.
DIRECT REPLACEMENT
s
KAR Series
KAR4022 KAR5022
KAR6022 KAR4622
KAR6932 KAR5722
Installation Manual
ARC Audio speakers are designed to fit most
applications in the original stock location without
modification. Some vehicles may require minor
removal of material and relocation of mounting holes
to achieve a proper fit.
A WORD ON DISTORTION
Most speaker damage occurs as a result of amplifier
distortion also known as “Clipping”. Clipping occurs
when an amp is driven beyond its maximum rated
output. This kind of distortion can be hard to hear
unless you know what to listen for. Any time you hear
a harsh ear piercing sound at high volume your amp
is probably clipping.
1
KAR6022
Diameter
Max Power
Nor.
Sensitivity
Frequency
response
IMP.
Power
KAR4022
Diameter
Max Power
Nor. Power
Sensitivity
Frequency
response
IMP.
KAR6932
Diameter
Max Power
Nor. Power
Sensitivity
Frequency
response
IMP.
Specifications
6 ½”
86db
70 watts Max Power
35 watts Nor. Power
60hz
20Khz
4 Ohm
4”
86db
40 watts Max Power
20 watts Nor. Power
110hz
20Khz
4 Ohm
6” X 9”
86db
110watts Max Power
55 watts Nor. Power
50hz
20Khz
4 Ohm
CAUTION:
KAR5022
-
Diameter
Sensitivity
Frequency
response
IMP.
86db
KAR4622
-
Diameter
Sensitivity
Frequency
response
IMP.
86db
KAR5722
Diameter
Sensitivity
-
Frequency
response
IMP.
86db
5 ¼”
50 watts
25 watts
80hz
20Khz
4 Ohm
4” X 6”
50 watts
25 watts
90hz
20Khz
4 Ohm
5” X 7”
70 watts
35 watts
65hz
20Khz
4 Ohm
Please check the suitability of the installation
location before you begin. Do not cut any of the
car’s structure. Pay attention to the mechanism of
the window and door.
If you do not have experience with automotive
electrical and mechanical systems contact a
professional installer. Paying a qualified installer is
almost always cheaper then paying a dealership to
repair your car.
THE INSTALL
ARC Audio’s KAR Series
designed to fit most vehicles without modification.
Some locations will require cutting to obtain a proper
fit.
1.
Remove the interior panel to expose the
stock speaker. It may take some time to find
and remove all the clip and screws to
remove this panel.
2.
Remove the stock speaker and disconnect it
from the wiring.
3.
Check the fit with the new speaker. Make
sure that all the door and window hardware
will clear the larg
coaxial
er magnet.
speakers are
2
3
Loading...