Arcadyan Technology WN4403ARC Users Manual

WN4403 802.11g miniPCI Adapter

User’s Manual

1. Introduction

The WN4403 is designed to provide Wireless LAN finction on a MiniCPI Type IIIB form factor which is
for built-in Wireless gateway/Wireless ADSL Router. The function is based on Intersil ISL3686 chipset, which implements the full
IEEE802.11g standard data rates up to 54 Mbps.

2. Features

- TI TNETW1130GVF MAC and Basband Processor and Rasia RC2422B and RC2326 RF chip.

- IEEE802.11 Direct Sequence Spread Spetrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM)

- IEEE802.11 Standard Data Rates: 1, 2, 5.5 and 11 Mbps and up to 54Mbps 11g.

- Full implementation of the MAC protocol specified in IEE Standard of 802.11-1999 and 802.11g.

- Internal encryption engine executes IEEE 802.11 WEP

- 128-bit WEP encryption, backward compatible with 64-bit solution

- Support BSS and IBSS operation under Distributed Coordination Function (DCF) and Ponit

Coordination Function (PCF)

- Support two antenna.

3. Specification

3.1 Interface:

- IEEE 802.11g compliant

- PCI Bus interface specification 2.2

- MiniPCI type A

3.2 Mechanical

Dimension: 42.45 x 59.75 x 4.8 mm (L x W x H)

4. Environmental Operating Ranges

- Operating Temperature : 0 ~55° C , Humidity 10 ~ 90%

- Storage Temperature : -20 ~90° C, Humidity 10 ~ 90%

5. Power Consumption

450 m A

9.Drivers support

Microsoft Windows 98SE, Windows ME/2000 /XP,

10.Drivers installation

*Windows 98SE/Me/2000/XP:

The following installation operates under Windows 2000. Procedures will be the same for Windows 98SE/Me/XP.

I. Install the Driver and Utility

A. Insert the CD into the CD-ROM device and execute the " setup.e xe" program. The InstallShield Wizard box will a ppear, click

"Next" to continue.

B. Follow the instruction of the installation program. The program will install the software for this device directly.
C. Click "Finish" to complete the installation.

After completing the Driver adn Utility installation, a new icon will be displayed in the system tray at the bottom of the

D.

screen. Click the icon and start using the WLAN MiniPCI Adapter.