Aquatic AIIS7236RSYTO, AIIS7236LSYTO, AIIS7236lSY, AIIS7236RSY User Manual
SymPhONy 13
SymPhONy SErIES Model # -- See BeloW
AIIS7236lSY / AIIS7236lSYTo (lefT drAIn) / AIIS7236rSY / AIIS7236rSYTo (rIghT drAIn)
Right Drain Model
18”
36”
18”
48”
37 1/4”
Standard
Pump
Location
19”
Deck Width 2 3/4”
63 1/2”
72 1/8”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 72 1/8” x 36” x 20 1/4”
183 cm x 91 cm x 51 cm
Bathing Well 48” long
18” wide
17” interior depth
Maximum Water Depth 13 3/4”
Shipping Weight 125 lbs. / 57 kg
Tub Weight Filled 652 lbs. / 296 kg
Tub Only Weight 86 lbs. / 39 kg
Gallons to Overow 68 gal. / 257 L
Gallons to Operate 51 gal. / 193 L
ELECTRICAL SPECIFICATIONS:
Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V
required protected w/ Class A GFCI
, separate circuit
20 1/4”
16 3/4”
Note: Tub only model does not include
access panels unless ordered as an option.
STANDARD EQUIPMENT:
6 Hydrotherapy Jets including:
- 2 Spinning Back Jets
- 4 Directional Jets
Aquatic Quality Features:
- .80 HP Run-Dry Pump
- Bath-Side On/Off Air Switch
- ”Quiet Pad”
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- 2 Arm Rests
- Integrally Molded Tile Flange
- Color Matched Integral Skirt with Removable Access Panels
- Color Matched Trim and Jets (Select Colors)
- Right or Left Hand Drain
- Durable, Easy to Clean, Lucite
- Available in 8 Standard No-Charge Colors
UL and IAPMO Listed, Factory Tested
Limited 10 Year Warranty
Anti-Vibration Pump Mount for Quiet Pump Operation
®
Cast Acrylic Surface
37 1/4”
36”
OPTIONAL EQUIPMENT:
• Comfort Pillow--Oval or Rectangle
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Removable Access Panels (Tub Only)
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Rough-In Plumbing
Measurements
8 3/4”
2 1/4”
Only)
Fax-On-Demand
Document # 1281
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
140
www.aquaticwhirlpools.com 800.555.5324
October 2007
Loading...