Aquatic AI8ANF6667 User Manual
INFINITy 8
INFINITy SErIES model # AI8INF6667
Two Person Bath
66”
Pump
69”
20 1/2”
No alternate pump location available.
92 1/2”
29”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 66” x 66” x 29”
168 cm x 168 cm x 74 cm
Bathing Well 40” long
22 1/2” wide
23 1/4” interior depth
Shipping Weight 569 lbs. / 258 kg
Tub Weight Filled 997 lbs. / 452 kg
Weight w/Equipment 208 lbs. / 94 kg
Gallons to Overow 95 gal. / 360 L
Gallons to Operate 1 bather: 76 gal. / 288 L
2 bathers: 57 gal. / 216 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
This unit has a 3/4” female waterfall ll spout connection.
Fax-On-Demand
Document # 1180
66”
Blower
Fill Spout Location
*Not available without Fast-Fill Waterfall Spout.
28 1/4”
27”
25 1/2”
23 3/4”
21 7/8”
STANDARD EQUIPMENT:
17 Hydrotherapy Jets including:
- 12 Shiatsu Back Jets
- 2 Full Size Pressure-Flo Hydrotherapy Jets
- 1 Recessed Rotary Massage Jet
- 2 Recessed Rotary Massage Elite Jets
Air Bath System:
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
Aquatic Quality Features:
- 2 HP Run-Dry Pump
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Shiatsu Electronic Control Panel with Preprogrammed Jet Sequencer
- Bath-Side Electronic Control Panel with Temperature Display
- Pulsating Neck Jet Pillow
- Integrally Molded Fast-Fill Waterfall Spout (valves not included)
- Chromatherapy
- 2 Extra Deep & Wide Contoured Lounge Seats and 4 Arm Rests
- Slip Resistant Floor
- Adjusta-Level Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
Rough-In Plumbing
Measurements
14 1/2”
7”
OPTIONAL EQUIPMENT:
• Comfort Pillow -- Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Hand Held Jet - Chrome or Polished Brass
• Factory Installed Rigid ABS Tile Flange
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
January 2008
www.aquaticwhirlpools.com 800.555.5324
19
Loading...