Aquatic AI8AIR6643TO, AI8AIR6643 User Manual

SErENITy STudIO MODEL # AI8AIR6643 / AI8AIR6643TO (Tub Only)
Deck Width 3”
1
65 3/4”
2
43 1/2”
43 1/2”
24 1/2”
22 3/8”
21 1/4”
Note: Serenity tub only models feature
a Pre-leveled ABS Support Base.
Two Person Bath
Rough-In Plumbing Measurements
14”
2 1/2”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 65 3/4” x 43 1/2” x 24 1/2” 168 cm x 111 cm x 60 cm Bathing Well 42” long 28” wide 21 1/2” interior depth Shipping Weight 188 lbs. / 85 kg Tub Weight Filled 1017 lbs. / 462 kg Tub Only Weight 145 lbs. / 66 kg
Gallons to Overow 109 gal. / 413 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V Requirement 15 AMP; 120V, separate circuit required protected w/ Class A GFCI
Fax-On-Demand
Document #1187
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem­perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
STANDARD EQUIPMENT:
Air Bath System:
- 60 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
Comfort Pillow - Oval or Rectangle
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit
Waterproof Remote Control with infrared sensor
and 25’ cord
Optional Blower Location
Remote Blower Wiring Kit
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
March 2008
www.aquaticwhirlpools.com 800.555.5324
77
Loading...