Aquatic AI8AIR6643HS User Manual

HOTSOAk 70

HOTSOAk SErIES Model # AI8AIR6643HS

Two Person Bath

1

Deck Width 3”

65 3/4”

22 3/8”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 65 3/4” x 43 1/2” x 24 1/2”
168 cm x 111 cm x 60 cm
Bathing Well 42” long
28” wide
21 1/2” interior depth
Shipping Weight 188 lbs. / 85 kg
Tub Weight Filled 1017 lbs. / 462 kg
Tub Only Weight 145 lbs. / 66 kg

Gallons to Overow 109 gal. / 413 L

ELECTRICAL SPECIFICATIONS:

Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI

43 1/2”

2

43 1/2”

24 1/2”

21 1/4”

STANDARD EQUIPMENT:

Aquatic Quality Features:

- 1.5 kW Inline Maintenance Heater

- Run-Dry Pump with 20-Minute Timer

- 2 Circulation Portal Covers

- Bath-Side On/Off Electronic Button

- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

- Slip Resistant Floor

- Extra Deep and Long Bathing Well

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting*

• Comfort Pillow - Oval or Rectangle

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Optional Pump Location

• Premium Colors

All acrylic colors featured by Aquatic match the industry’s

leading xture manufacturers.

*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

Rough-In Plumbing
Measurements

14”

2 1/2”

Only)

Fax-On-Demand

Document #1245

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

114

www.aquaticwhirlpools.com 800.555.5324

August 2008