Aquatic AI7248R User Manual

dEl rAy

luxury SErIES Model # ai7248R

Deck Width

2 1/2”

2

47 3/4”

1

Two Person Bath

71 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 1/2” x 47 3/4” x 24 1/8”
182 cm x 121 cm x 61 cm
Bathing Well 43” long
31” wide
23 1/4” interior depth
Shipping Weight 254 lbs. / 115 kg
Tub Weight Filled 1230 lbs. / 558 kg

Gallons to Overow 131 gal. / 496 L
Gallons to Operate 1 bather: 111 gal. / 420 L
2 bathers: 91 gal. / 344 L

ELECTRICAL SPECIFICATIONS:

Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

Fax-On-Demand

Document # 1039

24 1/8”

22 1/2”

20 1/2”

STANDARD EQUIPMENT:

8 Hydrotherapy Jets including:

- 4 Full Size Pressure-Flo Hydrotherapy Jets

- 2 Recessed Rotary Massage Jets

- 2 StressEaz Neck & Shoulder Therapy Jets

Aquatic Quality Features:

- 1.75 HP Run-Dry Pump with 20-Minute Timer

- Bath-Side On/Off Electronic Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- 2 Arm Rests

- Slip Resistant Floor

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

F

47 3/4”

Rough-In Plumbing
Measurements

10 7/8”

3”

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting

• Comfort Pillow -- Oval or Rectangle

• Jet Finish

- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel

• Bolt-On Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• 1.5 kW Inline Maintenance Heater

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Factory Installed Rigid ABS Tile Flange

• 2 HP, 3-Speed Run-Dry Pump Upgrade

• Optional Pump Location

• Remote Pump Location

• Color Matched Acrylic Skirt

• Hand Held Jet - Chrome or Polished Brass

• Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Only)

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

52

www.aquaticwhirlpools.com 800.555.5324

March 2008