Aquatic AI7242SYTO, AI7242SY User Manual

SymPhONy 5

SymPhONy SERIES MODEL # AI7242SY / AI7242SYTO (Tub Only)

Deck Width

1 3/4”

3

25”

1

26 1/2”

49”

2

71 1/4”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 1/4” x 42 1/4” x 20 1/4”
181 cm x 107 cm x 51 cm
Bathing Well 49” long
26 1/2” wide
18” interior depth
Maximum Water Depth 12 1/2”
Shipping Weight 176 lbs. / 80 kg
Tub Weight Filled 717 lbs. / 325 kg
Tub Only Weight 126 lbs. / 57 kg

Gallons to Overow 71 gal. / 269 L
Gallons to Operate 57 gal. / 216 L

ELECTRICAL SPECIFICATIONS:

Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

42 1/4”

20 1/4”

18 1/4”

16 1/4”

STANDARD EQUIPMENT:

6 Hydrotherapy Jets including:

- 2 Spinning Back Jets

- 4 Directional Jets

Aquatic Quality Features:

- .80 HP Run-Dry Pump

- Bath-Side On/Off Air Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Color Matched Trim and Jets (Select Colors)

- Slip Resistant Floor

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited 10 Year Warranty

42 1/4”

Rough-In Plumbing
Measurements

OPTIONAL EQUIPMENT:

• Comfort Pillow--Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• 1.5 kW Inline Maintenance Heater (Pump Options 1, 2, 3)

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Factory Installed Rigid ABS Tile Flange

• Optional Pump Location

• Color Matched Acrylic Skirt

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

8 3/4”

2 5/8”

Only)

Fax-On-Demand

Document # 1273

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

132

www.aquaticwhirlpools.com 800.555.5324

February 2008