Aquatic AI7242RUOHS User Manual

hOTSOAk 58

hOTSOAk SErIES Model # ai7242ruohs

Two Person Bath

2

41 3/4”

1

35”

70”

20 1/8”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 70” x 41 3/4” x 26 1/4”
178 cm x 106 cm x 67 cm
Bathing Well 42 1/2” long
23” wide
23 1/4” interior depth
Shipping Weight 219 lbs. / 99 kg
Tub Weight Filled 919 lbs. / 417 kg
Tub Only Weight 134 lbs. / 61 kg

Gallons to Overow 95 gal. / 360 L

ELECTRICAL SPECIFICATIONS:

Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI

3

4

26 1/4”

STANDARD EQUIPMENT:

Aquatic Quality Features:

- 1.5 kW Inline Maintenance Heater

- Run-Dry Pump with 20-Minute Timer

- 2 Circulation Portal Covers

- Bath-Side On/Off Electronic Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

- Extra Deep Bathing Well

- Color Matched Grab Bar

- 4 Arm Rests

- Slip Resistant Floor

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Lifetime Limited Warranty

22”

41 3/4”

Rough-In Plumbing
Measurements

6 1/2”

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting*

• Comfort Pillow - Oval or Rectangle

• Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,

Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit

• Optional Pump Location

• Premium Colors

All acrylic colors featured by Aquatic match the industry’s

leading xture manufacturers.

Only)

13 1/4”

*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

Fax-On-Demand

Document #1233

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

August 2008

www.aquaticwhirlpools.com 800.555.5324

103