Aquatic AI7242RC46, AI28AIR7242TO User Manual

CENTury SErIES MODEL # AI7242RC46 / AI28AIR7242TO (Tub Only)
Deck
Total Width
Width 3”
5 1/2”
Two Person Bath
2
Back Angle
22˚
1
66”
72”
68”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 72” x 42” x 23 1/2” 183 cm x 107 cm x 60 cm Bathing Well 42” long 26” wide 21 1/4” interior depth Maximum Water Depth 17 1/2” Shipping Weight 244 lbs. / 111 kg Tub Weight Filled 1062 lbs. / 482 kg Tub Only Weight 138 lbs. / 63 kg Weight w/Equipment 182 lbs. / 83 kg Gallons to Overow 106 gal. / 401 L Gallons to Operate 1 bather: 87 gal. / 329 L 2 bathers: 68 gal. / 257 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V Requirement 15 AMP; 110V, separate circuit required protected w/ Class A GFCI Inline Heater 1.5 kW; 12 AMP; 110V Requirement 15 AMP; 110V, separate circuit required protected w/ Class A GFCI
3
Back Angle
22˚
42”
4
20 1/4”
23 1/2”
21”
STANDARD EQUIPMENT:
12 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 4 Pressure Plus Hydrotherapy Jets
- 3 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
Aquatic Quality Features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Chromatherapy LED Lighting
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty
42”
39 1/2”
Rough-In Plumbing Measurements
OPTIONAL EQUIPMENT:
Comfort Pillow -- Oval or Rectangle
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel or Satin Nickel
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, or Oil Rubbed Bronze
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit
Hand Held Jet - Chrome or Polished Brass
Optional Pump Location
Remote Pump Location
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
12 1/4”
3 1/2”
This unit is not recommended for shower installations.
Fax-On-Demand
Document # 1073
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
November 2007
Loading...