Aquatic AI7242OHS User Manual

HOTSOAK 55

HOTSOAK SERIES Model # ai7242oHS

Deck Width

1”

2

42”

1

72”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 72” x 42” x 23”
183 cm x 107 cm x 58 cm
Bathing Well 48” long
24” wide
19 3/4” interior depth
Shipping Weight 232 lbs. / 105 kg
Tub Weight Filled 857 lbs. / 389 kg
Tub Only Weight 138 lbs. / 63 kg

Gallons to Overow 87 gal. / 329 L

ELECTRICAL SPECIFICATIONS:

Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI

23”

21 1/4”

18 1/2”

STANDARD EQUIPMENT:

Aquatic Quality Features:

- 1.5 kW Inline Maintenance Heater

- Run-Dry Pump with 20-Minute Timer

- 2 Circulation Portal Covers

- Bath-Side On/Off Electronic Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

- 2 Color Matched Grab Bars

- 2 Arm Rests

- Slip Resistant Floor

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

42”

Rough-In Plumbing
Measurements

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting*

• Comfort Pillow - Oval or Rectangle

• Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color
Matched (Bone, White and Biscuit

• Factory Installed Rigid ABS Tile Flange

• Optional Pump Location

• Color Matched Acrylic Skirt

• Premium Colors

or Oil Rubbed Bronze

Only)

10 3/8”

2 1/2”

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

Fax-On-Demand

Document #1230

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

August 2008

www.aquaticwhirlpools.com 800.555.5324

101