Aquatic AI7236RC47 User Manual

CENTury 47 MOTIF
CENTury SErIES MODEL # AI7236RC47 / AI29AIR7236TO (Tub Only)
Back Angle
21˚
Deck Width
2 1/2”
Total
Width 5”
2
36 1/2”
1
68”
73”
68 1/2”
22 1/4”
25”
20 1/4”
36 1/2”
Rough-In Plumbing Measurements
13 1/2”
33”
SPECIFICATIONS:
Tub Size 73” x 36 1/2” x 25” 185 cm x 93.3 cm x 63.5 cm Bathing Well 46” long 20” wide 23” interior depth Maximum Water Depth 17” Shipping Weight 221 lbs. / 100 kg Tub Weight Filled 904 lbs. / 410 kg Tub Only Weight 106 lbs. / 48 kg Weight w/Equipment 152 lbs. / 69 kg Gallons to Overow 91 gal. / 344 L Gallons to Operate 72 gal. / 273 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V Requirement 15 AMP; 110V, separate circuit required protected w/ Class A GFCI Inline Heater 1.5 kW; 12 AMP; 110V Requirement 15 AMP; 110V, separate circuit required protected w/ Class A GFCI
This unit is not recommended for shower installations.
STANDARD EQUIPMENT:
8 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 Pressure Plus Hydrotherapy Jets
- 1 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
Aquatic Quality Features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Chromatherapy LED Lighting
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty
5 1/2”
OPTIONAL EQUIPMENT:
Comfort Pillow -- Oval or Rectangle
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel or Satin Nickel
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, or Oil Rubbed Bronze
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit
Hand Held Jet - Chrome or Polished Brass
Optional Pump Location
Remote Pump Location
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
Fax-On-Demand
Document # 1288
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
January 2008
Loading...