Aquatic ai7148R User Manual

ChESAPEAkE

luxury SErIES Model # ai7148R

1

47 1/2”

28”

2

Two Person Bath

13 1/2”

21 1/4”

71 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 1/2” x 47 1/2” x 24 3/4”
182 cm x 121 cm x 63 cm
Bathing Wells 48” long
32” wide
23” interior depth
Shipping Weight 237 lbs. / 107 kg
Tub Weight Filled 1350 lbs. / 612 kg

Gallons to Overow 139 gal. / 528 L
Gallons to Operate 1 bather: 120 gal. / 454 L
2 bathers: 88 gal. / 333 L

ELECTRICAL SPECIFICATIONS:

Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

47 1/2”

24 3/4”

22 3/8”

STANDARD EQUIPMENT:

8 Hydrotherapy Jets including:

- 4 Full Size Pressure-Flo Hydrotherapy Jets

- 2 Recessed Rotary Massage Jets

- 2 StressEaz Neck & Shoulder Therapy Jets

Aquatic Quality Features:

- 1.75 HP Run-Dry Pump with 20-Minute Timer

- Bath-Side On/Off Electronic Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- 2 Color Matched Grab Bars

- 2 Arm Rests

- Twin Opposing Extra Deep Lounges

- Slip Resistant Floor

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

Rough-In Plumbing
Measurements

28”

5”

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting

• Comfort Pillow - Oval or Rectangle

• Jet Finish

- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel

• Grab Bar

- White, Biscuit Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• 1.5 kW Inline Maintenance Heater

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• 2 HP, 3-Speed Run-Dry Pump Upgrade

• Optional Pump Location

• Remote Pump Location

• Hand Held Jet - Chrome or Polished Brass

• Premium Colors

Only)

Fax-On-Demand

Document # 1035

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

48

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

www.aquaticwhirlpools.com 800.555.5324

March 2008