Aquatic AI6644RC45 User Manual
CENTury 45
CENTury SErIES Model # AI6644RC45
32
Two Person Bath
14”
24”
1
66”
22 1/2”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 66” x 42” x 22 1/2”
168 cm x 107 cm x 57 cm
Bathing Well 43 1/2” long
28 1/2” wide
21” interior depth
Shipping Weight 220 lbs. / 100 kg
Tub Weight Filled 961 lbs. / 437 kg
Tub Only Weight 149 lbs. / 68 kg
Weight w/Equipment 148 lbs. / 67 kg
Gallons to Overow 98 gal. / 370 L
Gallons to Operate 1 bather: 74 gal. / 280 L
2 bathers: 50 gal. / 189 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater 1.5 kW; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
48 ”
42”
4
Note: This model does not include a Fast-Fill Waterfall Spout.
22 1/2”
19 3/4”
20 3/4”
STANDARD EQUIPMENT:
12 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 4 Pressure Plus Hydrotherapy Jets
- 3 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
Aquatic Quality Features:
- 2 HP, 3 Speed Run-Dry Pump
- 1.5 kW Inline Maintenance Heater
- Bath-Side Electronic Control Panel
- Chromatherapy
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- 2 Extra Deep & Wide Contoured Lounge Seats
- 4 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
42”
OPTIONAL EQUIPMENT:
• Comfort Pillow -- Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
• Hand Held Jet - Chrome or Polished Brass
• Optional Pump Location
• Remote Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
Rough-In Plumbing
Measurements
12 1/2”
5 3/4”
Fax-On-Demand
Document # 1008
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
30
www.aquaticwhirlpools.com 800.555.5324
March 2008
Loading...