Aquatic ai6636R User Manual

SOuTh PAdrE

luxury SErIES Model # ai6636R

Deck Width

2”

2

36”

1

66 3/8”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 66 3/8” x 36” x 23”
169 cm x 91 cm x 58 cm
Bathing Well 41” long
22” wide
21 3/4” interior depth
Shipping Weight 203 lbs. / 92 kg
Tub Weight Filled 806 lbs. / 366 kg

Gallons to Overow 85 gal. / 322 L
Gallons to Operate 66 gal. / 250 L

ELECTRICAL SPECIFICATIONS:

Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

Fax-On-Demand

Document # 1052

23”

21 1/2”

20 1/8”

STANDARD EQUIPMENT:

7 Hydrotherapy Jets including:

- 4 Full Size Pressure-Flo Hydrotherapy Jets

- 2 StressEaz Neck & Shoulder Therapy Jets

- 1 Recessed Rotary Massage Jet

Aquatic Quality Features:

- 1.75 HP Run-Dry Pump with 20-Minute Timer

- Bath-Side On/Off Electronic Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- 2 Color Matched Grab Bars

- 2 Arm Rests

- Slip Resistant Floor

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

36”

Rough-In Plumbing
Measurements

12”

2 1/4”

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting

• Comfort Pillow -- Oval or Rectangle

• Jet Finish

- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel

• Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• 1.5 kW Inline Maintenance Heater

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Factory Installed Rigid ABS Tile Flange

• 2 HP, 3-Speed Run-Dry Pump Upgrade

• Optional Pump Location

• Remote Pump Location

• Color Matched Acrylic Skirt

• Hand Held Jet - Chrome or Polished Brass

• Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Only)

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

66

www.aquaticwhirlpools.com 800.555.5324

March 2008