Aquatic AI6060FDSSY, AI6060FDSSYTO User Manual

SymPhONy 7

SymPhONy SErIES Model # AI6060FdSSY / AI6060FdSSYto (tUB oNlY)

59 1/2”

2

39”

9”

29 1/4”

26”

50”

83 1/4”

29 1/4”

7”

40”

19”

59 1/2”

Two Person Bath

58 1/2”

1

24”

Rough-In Plumbing
Measurements

See Top
Elevation

9 7/8”

17 1/4”

21”

19 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 59 1/2” x 59 1/2” x 21”
151 cm x 151 cm x 53 cm
Bathing Well 40” long
17 1/2” wide
19 3/8” interior depth
Maximum Water Depth 16”
Shipping Weight 224 lbs. / 102 kg
Tub Weight Filled 905 lbs. / 411 kg
Tub Only Weight 164 lbs. / 164 kg

Gallons to Overow 89 gal. / 337 L
Gallons to Operate 1 bather: 78 gal. / 295 L
2 bathers: 63 gal. / 238 L

ELECTRICAL SPECIFICATIONS:

Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

Fax-On-Demand

Document # 1275

STANDARD EQUIPMENT:

8 Hydrotherapy Jets including:

- 4 Spinning Back Jets

- 4 Directional Jets

Aquatic Quality Features:

-

.80 HP Run-Dry Pump

- Bath-Side On/Off Air Button

- Corner Seat

-

”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- 4 Arm Rests

- 2 Integrally Molded Safety Grasps

- Color Matched Trim and Jets (Select Colors)

-

Slip Resistant Floor

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested

Limited 10 Year Warranty

OPTIONAL EQUIPMENT:

• Comfort Pillow--Oval or Rectangle

• 1.5 kW Inline Maintenance Heater (Pump Options 1, 2)

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)

• Factory Installed Rigid ABS Tile Flange

• Optional Pump Location

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

134

www.aquaticwhirlpools.com 800.555.5324

July 2008