Aquatic AI6060DC User Manual

POINT ArENA
luxury SErIES Model # ai6060dC
Pump
59 1/2”
59 1/2”
Location
59 3/4”
17”
41 3/4”
No alternate pump location available.
83 1/2”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 59 1/2” x 59 1/2” x 24 1/2” 151 cm x 151 cm x 62 cm Bathing Well Lounge 1, 48” long Lounge 1, 20” wide Lounge 2, 40” long Lounge 2, 17” wide 22 3/4” interior depth Shipping Weight 271 lbs. / 123 kg Tub Weight Filled 926 lbs. / 420kg
Gallons to Overow 115 gal. / 436 L
Gallons to Operate 1 bather: 96 gal. / 364 L 2 bathers: 77 gal. / 216 L
ELECTRICAL SPECIFICATIONS:
Pump 1.75 HP; 12 AMP; 110V Requirement 15 AMP; 110V, separate circuit required protected w/ Class A GFCI Optional Heater 1.5 kW; 12.5 AMP; 110V Requirement 15 AMP; 110V, separate circuit required protected w/ Class A GFCI
17”
24 1/2”
22 3/4”
20 3/4”
STANDARD EQUIPMENT:
9 Hydrotherapy Jets including:
- 5 Full Size Pressure-Flo Hydrotherapy Jets
- 2 Recessed Rotary Massage Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
Aquatic Quality Features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- Bath-Side On/Off Electronic Button
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Color Matched Grab Bar
- 4 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty
Rough-In Plumbing Measurements
14”
6 3/4”
OPTIONAL EQUIPMENT:
Chromatherapy LED Lighting
Comfort Pillow - Oval or Rectangle
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel or Satin Nickel
Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
1.5 kW Inline Maintenance Heater
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit
Factory Installed Rigid ABS Tile Flange
2 HP, 3-Speed Run-Dry Pump Upgrade
Remote Pump Location
Color Matched Curved Acrylic Skirt
Hand Held Jet - Chrome or Polished Brass
Premium Colors
Only)
All acrylic colors featured by Aquatic match the
Fax-On-Demand
industry’s leading xture manufacturers.
Document # 1046
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
March 2008
www.aquaticwhirlpools.com 800.555.5324
59
Loading...