Aquatic AI6036RC50 User Manual
CENTury 50 MOTIF
CENTury SErIES MODEL # AI6036RC50 / AI32AIR6036TO (Tub Only)
Back
Angle
12˚
Deck
Width 3”
Total
Width 5”
2
36 1/2”
1
56”
60 1/2”
57”
22 1/4”
25”
20 1/2”
36 1/2”
Rough-In Plumbing
Measurements
14”
33 1/2”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 60 1/2”” x 36 1/2” x 25”
153.7 cm x 92.7 cm x 63.5 cm
Bathing Well 37 1/2” long
19” wide
22 3/4” interior depth
Maximum Water Depth 17 3/4”
Shipping Weight 206 lbs. / 93 kg
Tub Weight Filled 749 lbs. / 340 kg
Tub Only Weight 95 lbs. / 43 kg
Weight w/Equipment 136 lbs. / 62 kg
Gallons to Overow 74 gal. / 281 L
Gallons to Operate 55 gal. / 208 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater 1.5 kW; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
STANDARD EQUIPMENT:
8 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 Pressure Plus Hydrotherapy Jets
- 1 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
Aquatic Quality Features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Chromatherapy LED Lighting
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
6”
OPTIONAL EQUIPMENT:
• Comfort Pillow -- Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel, or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color
Matched (Bone, White and Biscuit
• Hand Held Jet - Chrome or Polished Brass
• Optional Pump Location
• Remote Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
Fax-On-Demand
Document # 1291
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
January 2008
Loading...