Aquatic AI6032SY, AI6032SYTO User Manual

SymPhONy 2

SymPhONy SErIES MODEL # AI6032SY / AI6032SYTO (Tub Only)

3

17 1/2”

1

40”

2

31 3/4”

59 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 59 1/2” x 31 3/4” x 19 3/4”
151 cm x 80 cm x 50 cm
Bathing Well 40” long
17 1/2” wide
17 1/4” interior depth
Maximum Water Depth 13 1/2”
Shipping Weight 143 lbs. / 65 kg
Tub Weight Filled 478 lbs. / 217 kg
Tub Only Weight 103 lbs. / 47 kg

Gallons to Overow 45 gal. / 170 L
Gallons to Operate 38 gal. / 144 L

ELECTRICAL SPECIFICATIONS:

Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

31 3/4”

18”

19 3/4”

17”

STANDARD EQUIPMENT:

6 Hydrotherapy Jets including:

- 2 Spinning Back Jets

- 4 Directional Jets

Aquatic Quality Features:

- .80 HP Run-Dry Pump

- Bath-Side On/Off Air Button

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- 2 Arm Rests

- Color Matched Trim and Jets (Select Colors)

- Slip Resistant Floor

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited 10 Year Warranty

Rough-In Plumbing
Measurements

8 3/4”

1 3/4”

OPTIONAL EQUIPMENT:

• Comfort Pillow--Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Factory Installed Rigid ABS Tile Flange

• Optional Pump Location

• Color Matched Acrylic Skirt

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Only)

Fax-On-Demand

Document # 1270

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

March 2008

www.aquaticwhirlpools.com 800.555.5324

129