Aquatic AI5AIR6636HS User Manual

hOTSOAk 64

hOTSOAk SErIES Model # AI5AIR6636HS

35 3/8”

Deck Width 2”

65 3/4”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 65 3/4” x 35 3/8” x 23”
167 cm x 90 cm x 58 cm
Bathing Well 44” long
25” wide
21 3/4” interior depth
Shipping Weight 209 lbs. / 95 kg
Tub Weight Filled 806 lbs. / 366 kg
Tub Only Weight 117 lbs. / 53 kg

Gallons to Overow 85 gal. / 322 L

ELECTRICAL SPECIFICATIONS:

Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI

This unit is not recommended for shower installations.

23”

22”

20 1/8”

STANDARD EQUIPMENT:

Aquatic Quality Features:

- 1.5 kW Inline Maintenance Heater

- Run-Dry Pump with 20-Minute Timer

- 2 Circulation Portal Covers

- Bath-Side On/Off Electronic Button

- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

- Raised Seat

- Slip Resistant Floor

- 2 Arm Rests

- Extra Deep and Long Bathing Well

- Pre-leveled ABS Support Base

- 2 Color Matched Grab Bars

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

35 3/8”

Rough-In Plumbing
Measurements

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting*

• Comfort Pillow - Oval or Rectangle

• Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit

• Factory Installed Rigid ABS Tile Flange

• Color Matched Acrylic Skirt

• Premium Colors

All acrylic colors featured by Aquatic match the industry’s

leading xture manufacturers.

Only)

10”

1 3/4”

*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

Fax-On-Demand

Document #1239

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

108

www.aquaticwhirlpools.com 800.555.5324

August 2008