Aquatic AI3INF7236 User Manual

INFINITy 3

INFINITy SErIES model # AI3INF7236

Back Angle 33˚

Pump

20”

37”

Fill Spout Location

(not shown)

30 3/4”

18”

No alternate pump location available.

71 1/2”

44”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 1/2” x 37” x 30 3/4”
182 cm x 94 cm x 78 cm
Bathing Well 44” long
20” wide
22” interior depth
Maximum Water Depth 18 1/2”
Seat 13 1/2” long
15” wide
Shipping Weight 374 lbs. / 170 kg
Tub Weight Filled 972 lbs. / 441 kg

Gallons to Overow 102 gal. / 386 L
Gallons to Operate 69 gal. / 261 L

ELECTRICAL SPECIFICATIONS:

Pump 2 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI

This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

This unit is not recommended for shower installations.

This unit has a 3/4” female waterfall ll spout connection.

Fax-On-Demand

Document # 1117

Blower

*Available without fast-fill waterfall spout.

26 1/4”

23 1/4”

STANDARD EQUIPMENT:

16 Hydrotherapy Jets including:

- 12 Shiatsu Back Jets

- 2 Rotary Massage Foot Jets

- 2 Full Size Pressure-Flo Hydrotherapy Jets

Air Bath System:

- 1 HP Variable Speed Air Blower with 20-Minute Timer

- Electronic Control Panel

- Automatic Purge and Dry Cycle

- 600 Watt Air Heating System

Aquatic Quality Features:

- 2 HP Run-Dry Pump

- 1.5 kW Inline Maintenance Heater

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- Shiatsu Electronic Control Panel with Preprogrammed Jet Sequencer

- Bath-Side Electronic Control Panel with Temperature Display

- Pulsating Neck Jet Pillow

- Reclining Lounge Seat and 2 Arm Rests

- Integrally Molded Fast-Fill Waterfall Spout/Optional

- please specify on order (valves not included)

- Chromatherapy

- Slip Resistant Floor

- Adjusta-Level Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

Rough-In Plumbing
Measurements

23”

10 1/2”

1 3/8”

OPTIONAL EQUIPMENT:

• Available without fast-ll waterfall spout

- See Price List for

• Jet Finish

- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Hand Held Jet - Chrome or Polished Brass

• Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Details

Only)

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

14

www.aquaticwhirlpools.com 800.555.5324

October 2007