Aquatic AI35lUX6642, AI30AIR6642HS User Manual
hotsoak 88 MotIf
hotsoak sERIEs MODEL # AI30AIR6642HS / AI30AIR6642TO (Tub Only)
Back Angle
24˚
Deck Width
2 3/4”
Total Width
5 1/4”
Back Angle
22˚
Two Person Bath
2
42 1/2”
1
59 1/2”
59 3/4”
62”
21 1/4”
42 1/2”
24 1/4”
21 3/4”
39 1/2”
Rough-In Plumbing
Measurements
12 1/2”
3 1/2”
sPECIfICatIoNs:
GENERAL SPECIFICATIONS:
Tub Size 65 3/4” x 42 1/2” x 24 1/4”
167 cm x 108 cm x 62 cm
Bathing Well 35” long
25 1/2” wide
21 1/4” interior depth
Maximum Water Depth 17”
Shipping Weight 189 lbs. / 86 kg
Tub Weight Filled 883 lbs. / 401 kg
Tub Only Weight 101 lbs. / 46 kg
Weight w/Equipment 111 lbs. / 50 kg
Gallons to Overow 93 gal. / 352 L
ELECTRICAL SPECIFICATIONS:
Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
Fax-On-Demand
Document #1305
STANDARD EQUIPMENT:
Aquatic Quality Features:
- 1.5 kW Inline Maintenance Heater
- Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-Side On/Off Electronic Button
- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation
- Slip Resistant Floor
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
• Chromatherapy*
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
• Optional Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the industry’s
leading xture manufacturers.
*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
Only)
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
July 2008
Loading...