Aquatic AI35AIR6036HS User Manual
Back Angle
26°
hOTSOAk 92
hOTSOAk 92 Model # AI35AIR6036HS
Deck
Width
4”
21”
38”
59 3/4”
SPECIFICATIONS:
Deck Width
3 3/4”
22”
36”
24”
20 1/2”
36”
Rough-In Plumbing
Measurements
10 3/4”
2 3/4”
GENERAL SPECIFICATIONS:
Tub Size 59 3/4” x 36” x 24”
152 cm x 91 cm x 61 cm
Bathing Well 38” long
21” wide
21” interior depth
Maximum Water Depth 17 1/2”
Shipping Weight 158 lbs. / 72 kg
Tub Weight Filled 779 lbs. / 353 kg
Tub Only Weight 88 lbs. / 40 kg
Weight with Equipment 98 lbs. / 44 kg
Gallons to Overow 82 gal. / 310 L
ELECTRICAL SPECIFICATIONS:
Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Fax-On-Demand
Document # 1232
STANDARD EQUIPMENT:
Aquatic Quality Features:
- 1.5 kW Inline Maintenance Heater
- Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-Side On/Off Electronic Button
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
• Chromatherapy*
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bars
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Chromatherapy
• Integral Tiling Flange (Customer must specify which
side(s) should receive ange)
• Color Matched Acrylic Skirt
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
Only)
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product
as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no
responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
June 2008
Loading...