Aquatic AI33AIR6634, AI33AIR6634TO User Manual
serenity 33
serenity series MODEL # AI33AIR6634 / AI33AIR6634TO (Tub Only)
Back
Angle
18˚
Deck Width
3”
24”
23”
66 1/4”
Chromatherapy
Located Under
Fill Spout
47”
21
34”
Back
Angle
18˚
18 3/4”
25 3/4”
34”
21 3/4”
19 3/4”
Rough-In Plumbing
Measurements
8 3/4”
sPeCiFiCAtiOns:
GENERAL SPECIFICATIONS:
Tub Size 66 1/4” x 34” x 25 3/4”
168 cm x 86 cm x 65 cm
Bathing Well 47” long
24” wide
19” interior depth
Maximum Water Depth 15”
Shipping Weight 183 lbs. / 83 kg
Tub Weight Filled 812 lbs. / 368 kg
Tub Only Weight 96 lbs. / 44 kg
Weight w/Equipment 106 lbs. / 48 kg
Gallons to Overow 85 gal. / 322 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
Fax-On-Demand
Document # 1136
STANDARD EQUIPMENT:
Air Bath System:
- 72 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Integrally Molded Fast-Fill Waterfall Spout (valves not included)
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
1 1/2”
OPTIONAL EQUIPMENT:
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bars
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Waterproof Remote Control with infrared sensor
and 25’ cord
• Remote Blower Wiring Kit
• Optional Blower Location
• Factory Installed Tile Flange*
• Color Matched Acrylic Skirt
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
* Tile ange cannot be installed on waterfall ll spout side.
Only)
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will
be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets
will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
June 2008
Loading...