Aquatic AI31AIR6636HS User Manual
hotsoak 89 MotIf
hotsoak sERIEs MODEL # AI31AIR6636HS / AI31AIR6636TO (Tub Only)
Back
Angle
19˚
Deck Width
2 1/2”
Total
Width 5”
2
36 3/4”
1
62 1/4”
66 1/2”
25”
20 1/2”
22 1/4”
63 1/2”
36 3/4”
33 3/4”
Rough-In Plumbing
Measurements
13 1/2”
5 1/2”
sPECIfICatIoNs:
GENERAL SPECIFICATIONS:
Tub Size 66 1/2” x 36 3/4” x 25”
169 cm x 93.3 cm x 63.5 cm
Bathing Well 40” long
19 1/2” wide
23” interior depth
Maximum Water Depth 18”
Shipping Weight 183 lbs. / 86 kg
Tub Weight Filled 742 lbs. / 337 kg
Tub Only Weight 98 lbs. / 44 kg
Weight w/Equipment 111 lbs. / 50 kg
Gallons to Overow 76 gal. / 288 L
ELECTRICAL SPECIFICATIONS:
Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
Fax-On-Demand
Document #1306
STANDARD EQUIPMENT:
Aquatic Quality Features:
- 1.5 kW Inline Maintenance Heater
- Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-Side On/Off Electronic Button
- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation
- Slip Resistant Floor
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
• Chromatherapy*
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
• Optional Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the industry’s
leading xture manufacturers.
*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
Only)
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
January 2008
Loading...