Aquatic AI28AIR7242 User Manual
serenity 28 Motif
serenity series MODEL # AI28AIR7242 / AI28AIR7242TO (Tub Only)
Back
Angle 22˚
3
4
Back
Angle 22˚
42”
20 1/4”
23 1/2”
21”
42”
39 1/2”
Two Person Bath
Rough-In Plumbing
Measurements
12 1/4”
3 1/2”
Deck
Total Width
Width 3”
5 1/2”
2
1
66”
72”
68”
sPeCifiCAtions:
GENERAL SPECIFICATIONS:
Tub Size 72” x 42” x 23 1/2”
183 cm x 107 cm x 60 cm
Bathing Well 42” long
26” wide
21 1/4” interior depth
Maximum Water Depth 17 1/2”
Shipping Weight 247 lbs. / 112 kg
Tub Weight Filled 1049 lbs. / 476 kg
Tub Only Weight 138 lbs. / 63 kg
Weight w/Equipment 169 lbs. / 77 kg
Gallons to Overow 106 gal. / 401 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
Fax-On-Demand
Document # 1072
STANDARD EQUIPMENT:
Air Bath System:
- 52 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Waterproof Remote Control with infrared sensor
and 25’ cord
• Remote Blower Wiring Kit
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature
will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the
air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
November 2007
Loading...