Aquatic AI27AIRCOPPER, AI27COPPERTO User Manual

SErENITy Air Baths MODEL # AI27AIRCOPPER / AI27COPPERTO (Tub Only)
Two Person Bath
36”
Back Angle 14º
Note: Because the Serenity 27 is a one-of-a-kind handmade bath, dimensions may vary up to several inches. Please take all measurements directly from the bath.
36”
Note: This model can be ordered with or without decorative rings.
52 1/2”
72”
54”
SPECIFICATIONS:
Back Angle 14º
22 1/2”
27”
Note: This model requires a remote blower location. The connection for the air blower is under the tub; the blower may be placed up to 15 feet away and connected by piping under the
oor. Please refer to the Owner’s Manual for detailed installation
instructions. Document #1172 on our Fax-on Demand System or on our website at www.aquaticwhirlpools.com.
36”
Rough-In Plumbing Measurements
11 1/4”
26”
1 3/4”
GENERAL SPECIFICATIONS:
Tub Size 72” x 36” x 36” 183 cm x 91 cm x 91 cm Bathing Well 52 1/2” long 25” wide 22” interior depth Maximum Water Depth 16 3/4” Shipping Weight 451 lbs. / 205 kg Tub Weight Filled 1181 lbs. / 515 kg Tub Only Weight 185 lbs. / 84 kg
Gallons to Overow 120 gal. / 454 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V Requirement 15 AMP; 120V, separate circuit required protected w/ Class A GFCI
Fax-On-Demand
Document # 1007
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem­perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
STANDARD EQUIPMENT:
Air Bath System:
- 1 HP Variable Speed Remote Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle
- Waterproof Remote Control with Infrared Sensor and 25’ Cord
- Waste and Overow in Oil Rubbed Bronze
Aquatic Quality Features:
- Extra Deep and Long Bathing Well
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
This model can be ordered with or without
decorative rings.
Each Serenity 27 bath is handcrafted out of copper. Please note that the hammered copper with a
weathered nish will vary from model to model and
may gradually change with time due to copper’s unique character.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
June 2008
www.aquaticwhirlpools.com 800.555.5324
95
Loading...