Aquatic AI25AIR7242CF, AI25AIR7242CFTO User Manual

Deck Width
4”
SErENITy STudIO MODEL # AI25AIR7242CF / AI25AIR7242CFTO (Tub Only)
Two Person Bath
24 1/2”
43”
Back Angle 25º
Deck Width 4”
71 1/4”
22 1/2”
55”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 71 1/4” x 41 3/4” x 25 1/2” 181 cm x 105 cm x 65 cm Bathing Well 43” long 24 1/2” wide 21” interior depth Maximum Water Depth 18” / 46 cm Shipping Weight 305 lbs. / 139 kg Tub Weight Filled 1539 lbs. / 700 kg Tub Weight Only 230 lbs. / 106 kg
Gallons to Overow 150 gal. / 597 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V Requirement 15 AMP; 120V, separate circuit required protected w/ Class A GFCI
41 3/4”
Note:
The interior of bathing well and outside of bathing well can each
be specied in a different color. Only one premium color upcharge will be
applied if one or more premium colors are used.
This model requires a remote blower location. The connection for the
Note:
air blower is under the tub; the blower may be placed up to 15 feet away
and connected by piping under the oor. Please refer to the Owner’s Manual
for detailed installation instructions. Document #1184 on our Fax-on Demand System or on our website at www.aquaticwhirlpools.com.
41 3/4”
23 3/4”
25 1/2”
25 3/4”
STANDARD EQUIPMENT:
Air Bath System:
- 84 Air Jets
- 1 HP Variable Speed Remote Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle
- Waterproof Remote Control with Infrared Sensor and 25’ cord
Aquatic Quality Features:
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Extra Deep Bathing Well
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty
3 1/4”
OPTIONAL EQUIPMENT:
Comfort Pillow - Oval or Rectangle
Waste and Overow for Freestanding Models
- Chrome, Polished Brass, Satin Nickel, Polished Nickel, Oil Rubbed Bronze or White
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Rough-In Plumbing Measurements
12”
3 1/4”
Fax-On-Demand
Document # 1005
Each Serenity Studio model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem­perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
January 2008
www.aquaticwhirlpools.com 800.555.5324
93
Loading...