Aquatic ai24lux6060 User Manual
luxEAIr 24
luxEAIr SErIES Model # ai24lux6060
60”
16”
42”
No alternate pump/blower locations available.
24 1/4”
22 3/4”
23”
4 3/4”
84”
Back Angle
4”
19º
60”
Pump
Two Person Bath
Blower
60 1/2”
16”
Back Angle
24º
Rough-In Plumbing
Measurements
14”
20 1/2”
6 3/4”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 60” x 60” x 24 1/4”
152 cm x 152 cm x 62 cm
Bathing Well Lounge 1, 46” long
Lounge 1, 18” wide
Lounge 2, 39” long
Lounge 2, 18” wide
22 1/2” interior depth
Shipping Weight 300 lbs. / 136 kg
Tub Weight Filled 1255 lbs. / 569 kg
Weight w/Equipment 214 lbs. / 97 kg
Gallons to Overow 115 gal. / 436 L
Gallons to Operate 1 bather: 96 gal. / 364 L
2 bathers: 77 gal. / 216 L
ELECTRICAL SPECIFICATIONS:
Pump 1.75 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
STANDARD EQUIPMENT:
9 Hydrotherapy Jets including:
- 5 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 2 Recessed Rotary Massage Jets
Air Bath System:
- 64 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- 3 Massage Settings: Constant, Wave and Pulse
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
Aquatic Quality Features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Color Matched Grab Bar
- 5 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
• Chromatherapy LED Lighting
• Comfort Pillow - Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
• Hand Held Jet - Chrome or Polished Brass
• Factory Installed Rigid ABS Tile Flange
• Color Matched Acrylic Skirt
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
Fax-On-Demand
Document # 1208
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
34
www.aquaticwhirlpools.com 800.555.5324
April 2008
Loading...