Aquatic ai23lux7036 User Manual

Back Angle
24º
Pump
LuxEAIr SErIES Model # ai23lux7036
Back Angle
24º
Two Person Bath
18”
43”
35 1/8”
No alternate pump/blower locations available.
12”
70 1/2”
SPECIFICATIONS:
4 3/4”
Blower
35 3/4”
21 1/2”
25 1/2”
22 3/4”
35 3/4”
Rough-In Plumbing Measurements
12”
5 3/8”
GENERAL SPECIFICATIONS:
Tub Size 70 1/2” x 35 3/4” x 25 1/2” 179 cm x 91 cm x 65 cm Bathing Well 43” long 18” wide 22 1/2” interior depth Shipping Weight 221 lbs. / 100 kg Tub Weight Filled 817 lbs. / 371 kg Weight w/Equipment 153 lbs. / 69 kg
Gallons to Overow 80 gal. / 303 L Gallons to Operate 1 bather: 61 gal. / 231 L 2 bathers: 42 gal. / 159 L
ELECTRICAL SPECIFICATIONS:
Pump 1.75 HP; 12 AMP; 110V Inline Heater 1.5 kW; 12.5 AMP; 110V Requirement 1-15 AMP 2 pole, separate circuit required protected with Class A GFCI Blower 1 HP; 10.5 AMP; 110V Requirement 1-15 AMP 1 pole, separate circuit required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box. Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
Fax-On-Demand
Document # 1207
STANDARD EQUIPMENT:
8 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 2 Recessed Rotary Massage Jets
Air Bath System:
- 52 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- 3 Massage Settings: Constant, Wave and Pulse
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
Aquatic Quality Features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Color Matched Grab Bar
- 4 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested Limited Lifetime Warranty
OPTIONAL EQUIPMENT:
Chromatherapy LED Lighting
Comfort Pillow - Oval or Rectangle
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel or Satin Nickel
Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit
Hand Held Jet - Chrome or Polished Brass
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
March 2008
www.aquaticwhirlpools.com 800.555.5324
33
Loading...