Aquatic AI22lux6636 User Manual

luxEAIr 22

luxEAIr SErIES Model # ai22lux6636

Pump

Back Angle

35º

Blower

No alternate pump/blower locations available.

Deck Width 1 3/4”

42”

66 1/4”

22”

36”

36”

Rough-In Plumbing
Measurements

23 3/4”

12”

20 1/4”

2 1/4”

22”18”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 66 1/4” x 36” x 23 3/4”
168 cm x 91 cm x 60 cm
Bathing Well 42” long
22” wide
22” interior depth
Shipping Weight 248 lbs. / 112 kg
Weight w/Equipment 179 lbs. / 81 kg
Tub Weight Filled 885 lbs. / 401 kg

Gallons to Overow 85 gal. / 322 L
Gallons to Operate 66 gal. / 250 L

Electrical Specications:

Pump 1.75 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI

This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

STANDARD EQUIPMENT:

7 Hydrotherapy Jets including:

- 4 Full Size Pressure-Flo Hydrotherapy Jets

- 2 StressEaz Neck & Shoulder Therapy Jets

- 1 Recessed Rotary Massage Jet

Air Bath System:

- 55 Air Jets

- 1 HP Variable Speed Air Blower with 20-Minute Timer

- Electronic Control Panel

- 3 Massage Settings: Constant, Wave and Pulse

- Automatic Purge and Dry Cycle

- 600 Watt Air Heating System

Aquatic Quality Features:

- 1.75 HP Run-Dry Pump with 20-Minute Timer

- 1.5 kW Inline Maintenance Heater

- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation

- 2 Color Matched Grab Bars

- 2 Arm Rests

- Slip Resistant Floor

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting

• Comfort Pillow - Oval or Rectangle

• Jet Finish

- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel

• Grab Bar

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Hand Held Jet - Chrome or Polished Brass

• Factory Installed Rigid ABS Tile Flange

• Color Matched Acrylic Skirt

• Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Only)

Fax-On-Demand

Document # 1206

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

32

www.aquaticwhirlpools.com 800.555.5324

March 2008