Aquatic AI22AIR6636CHS User Manual
hOTSOAk 77
hOTSOAk SERIES Model # ai22air6636CHS
Two Person Bath
40”
Deck
Width 4”
22 1/2”
Deck Width 3 3/4”
36”
66”
63”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 66” x 36” x 24”
168 cm x 91 cm x 61 cm
Bathing Well 40” long
22 1/2” wide
21” interior depth
Shipping Weight 189 lbs. / 86 kg
Tub Weight Filled 844 lbs. / 384 kg
Tub Weight Only 123 lbs. / 56 kg
Gallons to Overow 87 gal. / 329 L
ELECTRICAL SPECIFICATIONS:
Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI
20 1/2”
STANDARD EQUIPMENT:
Aquatic Quality Features:
- 1.5 kW Inline Maintenance Heater
- Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-Side On/Off Electronic Button
- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation
- Slip Resistant Floor
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
36”
33 1/2”
Rough-In Plumbing
Measurements
24”
22”
10 1/2”
2 1/4”
OPTIONAL EQUIPMENT:
• Chromatherapy LED Lighting*
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bars
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit
• Integral Tiling Flange (Customer must specify which
side(s) should receive ange)
• Premium Colors
Only)
All acrylic colors featured by Aquatic match the industry’s
leading xture manufacturers.
*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
Fax-On-Demand
Document #1252
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
August 2008
www.aquaticwhirlpools.com 800.555.5324
121
Loading...