Aquatic AI22AIR6636C, AI22AIR6636CTO User Manual
SErENITy STudIO 22
SErENITy STudIO MODEL # AI22AIR6636C / AI22AIR6636CTO (Tub Only)
Standard
Blower
Location
Two Person Bath
Deck Width
4”
20 1/2”
22 1/2”
40”
Deck Width 3 3/4”
66”
63”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 66” x 36” x 24”
168 cm x 91 cm x 61 cm
Bathing Well 40” long
22 1/2” wide
21” interior depth
Shipping Weight 189 lbs. / 86 kg
Tub Weight Filled 844 lbs. / 384 kg
Tub Weight Only 123 lbs. / 56 kg
Gallons to Overow 87 gal. / 329 L
ELECTRICAL SPECIFICATIONS:
Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
36”
24”
22”
STANDARD EQUIPMENT:
Air Bath System:
- 67 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:
- Chromatherapy
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
36”
33 1/2”
Rough-In Plumbing
Measurements
10 1/2”
2 1/4”
OPTIONAL EQUIPMENT:
• Comfort Pillow - Oval or Rectangle
• Bolt-On Grab Bars
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Waterproof Remote Control with infrared
sensor and 25’ cord
• Remote Blower Wiring Kit
• Factory Installed Tile Flange
• Premium Colors
Only)
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Fax-On-Demand
Document # 1002
Each Serenity Studio model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
90
www.aquaticwhirlpools.com 800.555.5324
January 2008
Loading...