Aquatic AI21AIR7242CHS User Manual

hOTSOAk 76

hOTSOAk SErIES Model # AI21AIR7242CHS

Deck Width

4 3/4”

Two Person Bath

24 3/4”

43 1/2”

Deck Width 4 1/4”

71 1/4”

68 3/8”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 1/4” x 41 1/2” x 24”
181 cm x 105 cm x 61 cm
Bathing Well 43 1/2” long
24 3/4” wide
21 1/4” interior depth
Shipping Weight 188 lbs. / 85.5 kg
Tub Weight Filled 1359 lbs. / 618 kg
Tub Weight Only 138 lbs. / 63 kg

Gallons to Overow 163 gal. / 618 L

ELECTRICAL SPECIFICATIONS:

Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI

41 1/2”

41 1/2”

24”

21”

38 3/4”

STANDARD EQUIPMENT:

Aquatic Quality Features:

- 1.5 kW Inline Maintenance Heater

- Run-Dry Pump with 20-Minute Timer

- 2 Circulation Portal Covers

- Bath-Side On/Off Electronic Button

- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

- Slip Resistant Floor

- Extra Deep and Long Bathing Well

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting*

• Comfort Pillow - Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit

• Integral Tiling Flange (Customer must specify which

side(s) should receive ange)

• Premium Colors

22”

Rough-In Plumbing
Measurements

12 1/4”

2 1/4”

Only)

All acrylic colors featured by Aquatic match the industry’s

leading xture manufacturers.

*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

Fax-On-Demand

Document #1251

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

120

www.aquaticwhirlpools.com 800.555.5324

August 2008