Aquatic AI18AIR7242 User Manual

SErENITy STudIO 18

SErENITy STudIO MODEL # AI18AIR7242 / AI18AIR7242TO (Tub Only)

Deck Width

4 1/2”

24”

48”

Back Angle 23.7º

Deck Width 4”

72”

68 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 72” x 42” x 24”
189 cm x 107 cm x 56 cm
Bathing Well 48” long
24” wide
22” interior depth
Maximum Water Depth 17”
Shipping Weight 265 lbs. / 97 kg
Tub Weight Filled 1128 lbs. / 428 kg
Tub Only Weight 182 lbs. / 74 kg
Weight w/Equipment 182 lbs. / 97 kg

Gallons to Overow 114 gal. / 428 L

ELECTRICAL SPECIFICATIONS:

Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI

42”

24”

22 1/4”

21”

Note: Serenity tub only models feature a

Pre-leveled ABS Support Base.

STANDARD EQUIPMENT:

Air Bath System:

- 84 Air Jets

- 1 HP Variable Speed Air Blower with 20-Minute Timer

- 600 Watt Air Heating System

- Electronic Control Package with Wave and Pulse Features

- Automatic Purge and Dry Cycle with Water Sensors

Aquatic Quality Features:

- Chromatherapy

- Slip Resistant Floor

- Air Channels Lined with Antimicrobial Coating

- Pre-leveled ABS Support Base

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

42”

38”

Rough-In Plumbing
Measurements

OPTIONAL EQUIPMENT:

• Comfort Pillow - Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Waterproof Remote Control with infrared sensor

and 25’ cord

• Remote Blower Wiring Kit

• Integral Tiling Flange (Customer must specify which

side(s) should receive ange)

• Premium Colors

11 1/2”

3”

Only)

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Fax-On-Demand

Document # 1202

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will
be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets
will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

86

www.aquaticwhirlpools.com 800.555.5324

June 2008