Aquatic AI14AIR7240TO, AI14AIR7240 User Manual

SErENITy 14

SErENITy Air Baths MODEL # AI14AIR7240 / AI14AIR7240TO (Tub Only)

Deck Width

4”

39 1/4”

72”

56”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 72” x 39 1/4” x 23 1/2”
183 cm x 91.5 cm x 58.5 cm
Bathing Well 42” long
24” wide
21 1/4” interior depth
Shipping Weight 148 lbs. / 67 kg
Tub Weight Filled 845 lbs. / 384 kg
Tub Only Weight 112 lbs. / 51 kg

Gallons to Overow 88 gal. / 333 L

ELECTRICAL SPECIFICATIONS:

Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI

23 1/2”

21 3/4”

Note: Serenity tub only models feature a

STANDARD EQUIPMENT:

Air Bath System:

- 62 Air Jets

- 1 HP Variable Speed Air Blower with 20-Minute Timer

- 600 Watt Air Heating System

- Electronic Control Package with Wave and Pulse Features

- Automatic Purge and Dry Cycle with Water Sensors

Aquatic Quality Features:

- Chromatherapy

- Slip Resistant Floor

- Air Channels Lined with Antimicrobial Coating

- 2 Arm Rests

- Pre-leveled ABS Support Base

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

39 1/4”

35”

Pre-leveled ABS Support Base.

OPTIONAL EQUIPMENT:

• Comfort Pillow - Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Waterproof Remote Control with infrared sensor

and 25’ cord

• Remote Blower Wiring Kit

• Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

20 1/2”

Rough-In Plumbing
Measurements

15 1/2”

2 1/2”

Only)

Fax-On-Demand

Document # 1198

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem­perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

82

www.aquaticwhirlpools.com 800.555.5324

March 2008