Aquatic AI12AIR7240HS User Manual

hOTSOAk 72

hOTSOAk SErIES Model # AI12AIR7240HS

2

1

39 3/4”

Two Person Bath

71 3/4”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 3/4” x 39 3/4” x 23 3/4”
182 cm x 101 cm x 60 cm
Bathing Well 43” long
22 1/2” wide
21” interior depth
Shipping Weight 195 lbs. / 88 kg
Tub Weight Filled 742 lbs. / 337 kg
Tub Only Weight 134 lbs. / 61 kg

Gallons to Overow 76 gal. / 288 L

ELECTRICAL SPECIFICATIONS:

Pump 1/15 HP; 1.3 AMP; 110V
Heater 1.5 kW; 12.5 AMP; 110V
Requirements 20 AMP; 110V, separate circuit
required protected w/ Class A GFCI

39 3/4”

23 3/4”

21”

19 1/2”

STANDARD EQUIPMENT:

Aquatic Quality Features:

- 1.5 kW Inline Maintenance Heater

- Run-Dry Pump with 20-Minute Timer

- 2 Circulation Portal Covers

- Bath-Side On/Off Electronic Button

- “Quiet Pad” Anti-Vibration Pump Mount for Quiet Operation

- Slip Resistant Floor

- Extra Deep and Long Bathing Well

- Pre-leveled ABS Support Base

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

OPTIONAL EQUIPMENT:

• Chromatherapy LED Lighting*

• Comfort Pillow - Oval or Rectangle

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Optional Pump Location

• Premium Colors

All acrylic colors featured by Aquatic match the industry’s

leading xture manufacturers.

*This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.

Rough-In Plumbing
Measurements

12 1/8”

4 3/4”

Only)

Fax-On-Demand

Document #1247

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

116

www.aquaticwhirlpools.com 800.555.5324

August 2008