Aquatic AI10AIR7240TO, AI10AIR7240 User Manual

SErENITy 10

SErENITy Air Baths MODEL # AI10AIR7240 / AI10AIR7240TO (Tub Only)

Two Person Bath

39 5/8”

5”

Note: The interior of bathing well and outside of bathing well can each

be specied in a different color. Only one premium color upcharge will be

applied if one or more premium colors are used.

This model requires a remote blower location. The connection for the

Note:

air blower is under the tub; the blower may be placed up to 15 feet away

and connected by piping under the oor. Please refer to the Owner’s Manual

for detailed installation instructions. Document #1184 on our Fax-on Demand
System or on our website at www.aquaticwhirlpools.com.

Rough-In Plumbing
Measurements

12 1/8”

Blower

Connection

71 3/4”

29 1/4”

26 1/2”

25 1/4”

30 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 3/4” x 39 5/8” x 29 1/4”
182 cm x 101 cm x 74 cm
Bathing Well 43” long
22 1/2” wide
21” interior depth
Maximum Water Depth 16 1/2”
Shipping Weight 517 lbs. / 234 kg
Tub Weight Filled 798 lbs. / 363 kg
Tub Only Weight 194 lbs. / 88 kg

Gallons to Overow 76 gal. / 288 L

ELECTRICAL SPECIFICATIONS:

Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI

Fax-On-Demand

Document #1189

STANDARD EQUIPMENT:

Air Bath System:

- 60 Air Jets

- 1 HP Variable Speed, Remote Air Blower with 20-Minute Timer

- 600 Watt Air Heating System

- Electronic Control Package with Wave and Pulse Features

- Automatic Purge and Dry Cycle

- Waterproof Remote Control with infrared sensor and 25’ cord

Aquatic Quality Features:

- Claw Feet Available in Chrome, Polished Brass, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze and White

- Air Channels Lined with Antimicrobial Coating

- Extra Deep Bathing Well

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty

4 3/4”

OPTIONAL EQUIPMENT:

• Comfort Pillow - Oval or Rectangle

• Waste and Overow for Freestanding Models

- Chrome, Polished Brass, Satin Nickel, Polished Nickel,
Oil Rubbed Bronze or White

• Premium Colors

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem­perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

January 2008

www.aquaticwhirlpools.com 800.555.5324

79