AquaMetrix AM Specifications
AquaMetrix AM-Series
Stainless Steel Conductivity Sensors
Features
• Small size enables convenient installation and
service
• O-ring seals used on all versions for high on-
stream reliability
• Low Maintenance - Reduced cleaning require-
ments
• Wide Measuring range
• Automatic Temperature Compensation
• AMB34 measures conductivity directly in
process temperature up to 205ºC
Description
The AM-series sensors offer a compact design that allows installation into
standard pipe fittings in small line sizes such as 3/4” and 1”, avoiding the need
for special flow cells.
Simplicity of the design also allows them to be economically offered in exotic
metals for especially corrosive chemical applications.
Wetted materials of construction are 316 stainless steel and Teflon, with
double o-ring seals at all points. The outer EPDM o-ring bears the brunt of
process interface, allowing the back o-ring to maintain reliable sealing free
from chemical attack. An integral temperature element tailored to the analyzer of choice allows automatic compensation for maximum accuracy. Leads
are 15’ standard, stripped and tinned ends.
Process connections are made via a 1/2” NPT (AM12) or 3/4” NPT(AM34)
threads. This fitting can be screwed into a line, or tank, and it can also be
turned around and connected to a standpipe for use in a submersion configuration. The AM-series is good for general purpose and covers a broader
range of conductivities.
The AMB34 sensor was designed for high pressure, high temperature conductivity measurements, and is an ideal choice for boiler control applications.
Blowdown control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements are just a few of the many applications
in which this rugged and reliable sensor can be used.
Applications
• Plating
• High purity water applications
• Pharmaceutical Applications
• Reverse Osmosis systems
• Fume Scrubbers
• Cooling Towers
• Textile Manufacturing
• Food and Beverage
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
AM-Series Conductivity Sensor
Dimension B
Dimension A
OD 1/2”
1/2” NPT
Technical Data
Wetted Materials TeflonTM® (AM12) or PEEK® (AM34 and AMB34), EPDM, 316 Stainless Steel, Kynar® (optional)
Maximum Pressure / Temperature
AM12 316 SS tting: 200 PSI at 120°C, 500 PSIG at 100°C , Kynar® tting: 150 PSIG at 120°C.
AM34 316SS tting: 100 PSIG at 150°C, Kynar® tting: not rated
AM34B 250 PSIG at 205°C, 500PSIG at 100°C
Hot Tap 50 PSIG at all temperatures, no exeptions
Cell Constants AM12: 0.1/1/10 ; AM34: 0.01/0.1/1/10/50 ; AMB34: 0.01/0.1/1
Process Fitting AM12: 1/2” NPT; AM34: 3/4” NPT, AM34B: 3/4” NPT
Temperature Compensation Standard Pt1000rtd, other thermistor available as a special order
Dimensions
AM12
Cell Constant A max B B (Hot Tap)
0.01 3.5” 5.25” 18.0”
0.1 / 1 3.5” 5.25” 16.5”
Dimension A
OD 3/4” (0.83” for k=0.01)
Dimension A
OD 3/4”
Dimension B
3/4" NPT
3/4” NPT
10 7” 8.5” 16.5”
AM34
A max B B (Hot Tap)
All cell constants
5” 8” 16.5”
AMB34
Cell constant A B
0.01 2.75” 4.75”
0.1 0” 2”
1 1” 3”
Dimension B
Related Products
www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)
AM-2250 Controller
AM-2250TX Transmitter
Loading...