AquaMaster AMP5000, AMP5100, AMP5500 PRODUCT SPECIFICATIONS

Page 1
high efciency
water softeners
AquaMaster PRO professional water softeners use patented high
efciency design that conserves water and salt during regeneration.
Feel the softness.
Gone are the hard water deposits that damage hair and the soap curd that blocks skin pores.
See the brightness.
You’ll get cleaner, brighter, softer laundry when you wash with soft water.
Save money.
Less detergent and other cleaning products are needed to produce the same or better results. Save up to 75% on all soap products.
Conserve water. AquaMaster PRO uses less than 20 gallons of water per
regeneration. That is 80% less water than conventional softeners for equivalent hardness removed.
Save salt. AquaMaster PRO also uses 40% less salt than the salt efciency
requirement for NSF certication. Also accepts potassium chloride as an
alternative to salt.
Reduce iron. Models 5000 and 5100 reduce up to 10 ppm of ferrous iron.
Reduce chlorine. Exclusive whole-home rener, model 5500, reduces chlorine
taste and odour.
Rapid regeneration. AquaMaster PRO regenerates quietly, only when needed,
in as little as 20 minutes, compared to up to two hours for conventional softeners.
Easy installation. User friendly controller and built-in bypass valve.
Reliable operation. For quality assurance every unit is fully tested at the factory.
Save appliances.
Prevent scale build­up that clogs and shortens the life of plumbing and water using appliances.
Save energy.
Water heaters operating on hard water use up to 30% more energy. Make your water heater energy efcient and save!
System Tested and Certied
by both Water Quality Association and NSF
International against NSF/
ANSI Standard 44 for the
reduction of Barium, Radium
226/228, and Hardness
Reduction. Tested and
certied by WQA according
to CSA B483.1.
Page 2
2" Air gap
Well water
City water meter
Shut-off
valve
Hard water to
outside faucets
Cold soft
water
Hot soft
water
Water
heater
Outlet
Inlet
Overflow line and drain line
115 Volt
outlet
Ground wire and clamps
(copper pipe only)
Water
softener
1
2
3
4
SPECIFICATIONS AMP5000 AMP5100 AMP5500
Max. compensated hardness: 70 grains per gallon (gpg) 90 grains per gallon (gpg) 70 grains per gallon (gpg) Maximum capacity: 22,100 grains 36,400 grains 22,100 grains Maximum ferrous iron reduction: 10 ppm 10 ppm 0 Minimum pH (standard units): 7 7 7 Salt used per regeneration: 2.5 Ibs* 3 Ibs* 2.5 Ibs* Length of regeneration cycle: 20 minutes* 21 minutes* 20 minutes* Water used per regeneration: 16.4 gallons* 17.5 gallons* 20.2 gallons* Hardness removed per regeneration: 10,400 grains Plumbing connections: 3/4” or 1” MNPT 3/4”or 1” MNPT 3/4”or 1” MNPT Valve size: 1” 1” 1” Salt storage capacity: 120 lbs. 160 lbs. 160 lbs. Electrical requirements: 110/120 VAG, 12V 50/60 cycle 110/120 VAG, 12V 50/60 cycle 110/120 VAG, 12V 50/60 cycle Maximum water temperature: 120ºF 120ºF 120ºF Water pressure (min-max psi): 20 -120 20 -120 20 -120 Footprint (WxD): 15” x 26” 15” x 26” 15” x 26” Height: 25.5” 30.5” 30.5” Shipping Weight: 85 lbs. 105 lbs. 105 lbs.
Operational maintenance & replacement requirements are essential for the product to perform to specication. *Average at High Efciency setting. Dependent on water hardness level & water usage.
5
6
Innovative features that save water, salt and money.
1. User friendly controller
Just enter your water hardness number and the controller does the rest automatically.
2. Bypass valve
Factory installed, easy to operate and accepts standard copper ttings.
Reduce Ferrous Iron Reduce Chlorine
* 15,400 grains* 10,400 grains*
Water Softeners
3. Built-in dirt and sediment lter
Exclusive self-cleaning media lter
to 20 microns, never buy another
cartridge lter.
4. High capacity ne mesh resin
5. Exclusive distribution system
6. Unique safety shut-off valve
System Tested and Certied by both Water Quality Association and NSF International against NSF/ANSI Standard 44 for the reduction of Barium, Radium 226/228, and Hardness Reduction. Tested and certied by WQA according to CSA B483.1.
Made In
USA
Toll-free technical support
1.800.437.8993
www.aquamasterpro.ca
Loading...