Acrylic Shower Pan
• Model P4834SH – 4” Threshold
• Acrylic pan designed for new build and renovations of
existing hospitals, nursing homes, rehabilitation centers,
hotels, motels, dormitories and residential applications.
• Acrylic one-piece molded construction simplifies installation
with a lightweight durable base.
• Inside dimensions: 45½” W x 33” D x 4” H.
• 4” threshold height for top of slab installa t i o n.
Acrylic Shower Pan
Aqua Bath Shower Pan P4834SH – 4” threshold is molded from a single sheet of cast acrylic so as not to have
any joints or seams. Shall meet ANSI Z124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to be NAHB LISTED. The enclosure shall have inside dimensions of 45½” W x 33” D x 4” H
and outside dimensions of 48” W x 34¼” D x 6" H. The appro xi mate weight of the unit shall be 40lbs.
The shower pan shall be equipped with the following factory installed accessory: 1) Self-caulking brass drain with
stainless steel strainer (not installed). 2) Ribbed bottom for slip resistance (standard).
AVAILABLE OPTIONS
1) ASTM F462 non-slip bottom (see model P4834SH-VB – 4” Threshold).
(*) When the ASTM F462 bottom is specified, a signed off approval is required for the
bottom re-configuration.
Modifications: Received and / or approved by:
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
The P4834SH, as shown, is NOT ADA
compliant. Please see Aqua Bath's line
of ADA compliant shower pans. Please
check with your local city and state for
code compliancy. Aqua Bath accepts no
responsibility for final code compliance.
P4834SH with 4” Threshold - Acrylic Shower Pan
02/05
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
www.aquabath.com
Loading...