Aqua Bath IS3336SH-RS User Manual

L

T

F

Ribbed Bottom For

Slip Resistance

Top View - Right Hand Shown

16½"± 16½"±

15½"±

C
36½"
40½"

40½"

3½"

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

Accessible Series

Submittal Data

IS3336SH-RS

Important Note:

10" W x 12" H (I.D.)

Acrylic Soap Dish Insert

76"

42" O.D.

Aqua Bath Recommends The Use Of A
Slide Bar As An Accessory In The Unit Rather

han The Use Of A Glide Bar / Glide Rail.

80"

40"

33"

83"

24" Vertical Grab Bar
(2 Required)

84"

5" Threshold5" Threshold

34½" I.D.

35" O.D.

ront View and Right Side View

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.
The field installation instructions must be followed as directed or may void manufacturers warranty
Reference installation instructions for IS3336SH.

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com



.

02/09

ACCESSIBLE SERIES (Recessed Soap Dish)

p

• Model IS3336SH-RS-L valve on left.

• Model IS3336SH-RS-R valve on right.

• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.

• Acrylic one-piece molded construction simplifies installation.

• Inside dimensions: 33” W x 34½” D x 78” H.

• Can be furnished complete with valve, hand held shower set,
curtain and hooks.

• 5” threshold.

• Two 24” vertical grab bars.

• Vacuum-formed from .1875” one-piece sanitary grade acrylic.

• Manufacturing Tolerance Of (±1/4”) Due To The Nature

Of The Materials Used.

Acrylic Corner Shower Stall

The shower enclosure shall be Aqua Bath model IS3336SH-RS acrylic and be molded from a single sheet so as not to have any
joints or seams, shall meet ANSI Z124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed t o be NAHB LISTED. The enclosure shall have inside dimensions of 33” W x 34½” D x 78” H and outside
dimensions of 41” W x 35½” D x 84” H. The approximate weight of the unit shall be 205lbs.
An acrylic recessed soap dish insert shall be installed on the back wall with inside dimensions of 10” W x 12” H and outside
dimensions of 11½” W x 13½” H and shall be sealed from the backside to keep the unit waterproof.

Standard Accessories:

1) Two 24” x 1½” diameter vertical grab bars, fabricated from 18 gauge stainless steel with 1½” safety statute clearance,

mounted with stainless steel bolts and secured from the rear with 3” x 3” x 11 gauge metal mounting plates.

2) 1” diameter, 18 gauge stainless steel curtain rod. After grab bars and curtain rod have been factory installed, they will be
sealed from the backside making the unit completely waterproof.

3) Ribbed bottom for slip resistance (standard).

4) Self-caulking brass drain (fits 2” pipe) with stainless steel strainer and drain is to be field installed.
Available Accessories:

1) Factory installed fold-up seat.

2) Hand held shower set (includes 60” flex hose, swivel connector, brass nipple, lock nut, wall outlet and vacuum breaker).

3) 24” slide bar, 30” slide bar or two (2) wall brackets installed on valve wall for use with hand held shower set.
Note: The determination of the use of slide bar or wall brackets to be installed in the unit is based upon the valve package
chosen by the specifier for use in the unit. Aqua Bath recommends the use of a
than the use of a

4) Pressure balance or thermostatic control valve. 5) Shower curtain - antibacterial, with hooks.

6) Weighted shower curtain (patented), antibacterial, with hooks. 7) Seat belt (for the fold-up seat only).

8) Dome light (factory drilled only, must be field installed and light shipped separately from unit).

9) ASTM F462 non-slip bottom. (*) When the ASTM F462 bottom is specified with the center drain location,
it will re-configure the trench drain system. A signed off approval is required for the bottom re-configuration.

glide bar / glide rail.

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

The IS3336SH-RS is NOT ADA
compliant. Please see Aqua Bath’s full
line of ADA compliant shower and
tub/shower units. Please check with
your local city and state for code
compliancy. Aqua Bath accepts no
res

onsibility for final code compliance.

slide bar as an accessory in the unit rather

Modifications:

Received and / or approved by:

Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com

02/09