Aqua Bath IS3336SH PSY User Manual

16½"± 16½"±

(Tamper Proof)

Drain

15½"±

36½"
40½"

Top View - Right Hand Shown

Recessed Soap Dish

10" W x 12" H

5" Threshold

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

40½"

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

3½" I.D.

4" O.D.

Accessible Series

Submittal Data

Safety Track With Pop Carriers
And Hooks (Tamper Proof)

84"

83"

80"

40"

33"

42" O.D.

Front View and Right Side View

24" Grab Bar (2X)

42"

(Psychiatric)

IS3336SH PSY

(Tamper Proof)

34½" I.D.

35" O.D.

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.
The field installation instructions must be followed as directed or may void manufacturers warranty

Reference installation instructions for IS3336SH.

.

IS3336SH PSY

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com

02/09

ACCESSIBLE SERIES (Psychiatric)

p

• Model IS3336SH PSY-L valve on left.

• Model IS3336SH PSY-R valve on right.

• Bath units designed for psychiatric applications in hospitals,
nursing homes, rehabilitation centers and geriatric homes.

• Acrylic one-piece molded construction simplifies installation.

• Inside dimensions: 33” W x 34½” D x 78” H.

• Includes stainless steel grab bars (tamper proof) with mounting
plate and curtain track with pop out carriers and hooks.

• 5” threshold.

• Vacuum-formed from .1875” one-piece sanitary grade acrylic.

• Manufacturing Tolerance Of (±1/4”) Due To The Nature
Of The Materials Used.

Acrylic Corner Shower Stall

The shower enclosure shall be Aqua Bath model IS3336SH PSY acrylic and be molded from a single sheet so as not to have any
joints or seams, shall meet ANSI Z124.2. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed t o be NAHB LISTED. The enclosure shall have inside dimensions of 33” W x 34½” D x 78” H and outside
dimensions of 41” W x 35½” D x 84” H. A recessed soap dish shall be formed at 40” above the shower floor to bottom of soap
dish on the plumbing side back wall with inside dimensions of 10” W x 12” H and outside dimensions of 11½” W x 13½” H.
The approximate weight of the unit shall be 205lbs.

Standard Accessories:

1) Two 24” x 1½” diameter vertical grab bars, fabricated from 18 gauge stainless steel and mounted with stainless steel bolts and

secured from the rear with 3” x 3” x 11 gauge metal mounting plates. The grab bars have a closure plate welded along one side
of the bar that runs full length of the bar to make it tamper proof.
After the grab bars have been factory installed, they will be sealed from the backside making the unit completely waterproof.

2) White PVC curtain track with tamper proof screws and pop out carriers and hooks (designed to pop out at 40lbs of weight).

3) Ribbed bottom for slip resistance (standard).

4) Self-caulking brass drain (tamper proof, fits 2” pipe) with stainless steel strainer and drain is to be field installed.
Available Accessories:

1) Shower curtain – antibacterial.

2) Tamper proof dome light (factory drilled only, must be field installed and light shipped separately from unit).

3) ASTM F462 non-slip bottom.

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

The IS3336SH PSY is NOT ADA
compliant. Please see Aqua Bath’s full
line of ADA compliant shower and
tub/shower units. Please check with
your local city and state for code
compliancy. Aqua Bath accepts no
res

onsibility for final code compliance.

Modifications:

Received and / or approved by:

Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com

02/09