Aqua Bath C7236TS User Manual

F

Ribbed Bottom For Slip Resistance

18"

35½"

I.D.

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

18"11½"

Care Series

ADA Compliant

Submittal Data

C7236TS

Top View - Left Hand Shown

1" Dia. S.S. Curtain Rod

36"

ADA Control Area

18" Grab Bar

4"

(Max)

84"

83"

80"

54"

42"

24" Grab Bar

4"

18"

48" Grab Bars

17"

76"

9"

27"

15½"

63¼"

72" O.D.

35½" I.D.

36½" O.D.

ront View and Right Side View

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.
The field installation instructions must be followed as directed or may void manufacturers warranty
Reference installation instructions for C7236TS.

.

Page C-24

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com



10/08

CARE SERIES

A

p

• Model C7236TS-L valve on left.

• Model C7236TS-R valve on right.

• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.

• Meets ANSI A117.1, ADA Guidelines and other standards
for accessibility

• Acrylic one-piece molded construction simplifies installation.

• Inside dimensions: 69½" W x 35½" D x 78" H.

• Includes stainless steel grab bars with mounting plates
and curtain rod.

• Can be furnished complete with valve, hand held shower set,
curtain and hooks, waste and overflow and tub fill spout.

• Molded seat.

• Vacuum-formed from .1875” one-piece sanitary grade acrylic.

• Manufacturing Tolerance Of (1/4”) Due To The Nature

Of The Materials Used.

Tub / Shower

The tub enclosure shall be Aqua Bath model C7236TS acrylic and be molded from a single sheet so as not to have any joints or
seams, shall meet ANSI Z124.1. Shall meet ADA guidelines and other standards for accessibility. Unit shall have a backside
flame spread of less than 30 (Class B). Shall be designed to be ADA COMPLIANT and NAHB LISTED.
The enclosure shall have inside dimensions of 69½" W x 35½" D x 78" H and outside dimensions of 72" W x 36½" D x 84" H.
The approximate weight of the unit shall be 325lbs.

Standard Accessories:

1) Two 48" (on back wall), one 24" (on valve wall) and one 18” vertical, 1½" diameter 18 gauge stainless steel grab bars with

1½" safety statute clearance, mounted with stainless steel bolts and secured from the rear with 3" x 3" x 11 gauge metal mounting
plates. 2) 1" diameter, 18 gauge stainless steel curtain rod. After grab bars and curtain rod have been factory installed, they will
be sealed from the backside making the unit completely waterproof. 3) Ribbed bottom for slip resistance (standard).

4) One soap tray molded 52" above floor on back wall and one soap tray at dam level on center of back wall. 5) Molded-in seat.
Available Accessories:

1) Hand held shower set (includes 60" flex hose, swivel connector, brass nipple, lock nut, wall outlet and vacuum breaker).

2) 24" slide bar, 30" slide bar or two (2) wall brackets installed on valve wall for use with hand held shower set.
Note: The determination of the use of slide bar or wall brackets to be installed in the unit is based upon the valve package
chosen by the specifier for use in the unit. Aqua Bath recommends the use of a
than the use of a

5) Shower curtain - antibacterial, with hooks. 6) Diverter spout.

8) Dome light, (factory drilled only, must be field installed & light shipped separately from unit).

glide bar / glide rail. 3) Pressure balance or thermostatic control valve. 4) Waste and overflow.

7) ASTM F462 non-slip bottom.

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

Please check with your local city and
state for code compliancy. Aqua Bath's
advertised ADA compliant units are
based on our interpretation of the

mericans with Disabilities Act 1991
Guidelines. Field alterations or improper
installation could take the units out of
compliance. Aqua Bath accepts no

onsibility for final code compliance.

res

slide bar as an accessory in the unit rather

Modifications:

Received and / or approved by:

Name:______________________________

Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________

10/08

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com