Aqua Bath C6530BF-FUS-RS 2 User Manual

T

F

Ribbed Bottom For Slip Resistance

30"
I.D.

18"

30"

60" I.D.

28" L-Shaped Fold-Up Seat

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

Care Series

ADA Compliant

Top View - Right Hand Shown

Submittal Data

C6530BF-FUS-RS 2"

1" Dia. S.S. Curtain Rod

Important Note:
Aqua Bath Recommends The Use Of A
Slide Bar As An Accessory In The Unit Rather

han The Use Of A Glide Bar / Glide Rail.

3½" I.D.

4" O.D.

Acrylic Soap

Dish Insert

25" 10"

25"

76"

12"

ADA Control Area

27"

10"

84"

83"

80"

42"

36"

25¾" x 35"
Grab Bar

38"

20"

2" Threshold

60" I.D.

65" O.D.

2" Threshold

30" I.D.

31" O.D.

ront View and Right Side View

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.

The field installation instructions must be followed as directed or may void manufacturers warranty

.

Reference installation instructions for C6530BF 2".

ADA states that the threshold must be flush with the finished floor. Because of the threshold height,
the unit must be installed in a pit to comply with ADA.

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com

02/09

CARE SERIES (Recessed Soap Dish)

p

• Model C6530BF-FUS-RS 2”-L seat on left.

• Model C6530BF-FUS-RS 2”-R seat on right.

• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.

• Meets ANSI A117.1, ADA Guidelines and other standards
for accessibility

• Acrylic one-piece molded construction simplifies installation.

• Inside dimensions: 60” W x 30” D x 78” H.

• Can be furnished complete with valve, hand held shower set,
curtain and hooks.

• Barrier-Free Shower System, U.S . Patent No.6,178,571 B1.

• 2” threshold for pit detail installation.

• Factory installed fold-up seat full depth of stall.

• 25¾” x 35” x 1½” two wall wrap grab bar.

• Vacuum-formed from .1875” one-piece sanitary grade acrylic.

• Manufacturing Tolerance Of (±1/4”) Due To The Nature

Of The Materials Used.

Roll-In Shower Stall

The shower enclosure shall be Aqua Bath model C6530BF-FUS-RS 2” acrylic and be molded from a single sheet so as not to
have any joints or seams, shall meet ANSI Z124.2. Shall meet ADA guidelines and other standards for accessibility. Unit shall
have a backside flame spread of less than 30 (Class B). Shall be designed to be ADA COMPLIANT and NAHB LISTED.
The enclosure shall have inside dimensions of 60” W x 30” D x 78” H and outside dimensions of 65” W x 31” D x 84” H.
An acrylic recessed soap dish insert shall be installed on the back wall with inside dimensions of 10” W x 12” H and outside
dimensions of 11½” W x 13½” H and shall be sealed from the backside to keep the unit waterproof.
The approximate weight of the unit shall be 275lbs. The unit shall be formed with a patented recessed trench system so as to
direct water to the center drain. ADA states that the threshold must be flush with the finished floor.

Because of the threshold height, the unit must be installed in a pit to comply with ADA.
Standard Accessories:

1) One 25¾” x 35” x 1½” diameter two wall horizontal wrap grab bar fabricated from 18 gauge stainless steel with 1½” safety

statute clearance, mounted with stainless steel bolts and secured from the rear with 3” x 3” x 11 gauge metal mounting plates.

2) 28” "L" shaped phenolic fold-up seat. 3) 1” diameter, 18 gauge stainless steel curtain rod.
After grab bars, fold-up seat and curtain rod have been factory installed, they will be sealed from the backside making the unit
completely waterproof. 4) Ribbed bottom for slip resistance (standard).

5) Self-caulking brass drain (fits 2” pipe) with stainless steel strainer and drain is to be field installed.
Available Accessories:

1) Hand held shower set (includes 60” flex hose, swivel connector, brass nipple, lock nut, wall outlet and vacuum breaker).

2) 24” slide bar, 30” slide bar or two (2) wall brackets installed on valve wall for use with hand held shower set.
Note: The determination of the use of slide bar or wall brackets to be installed in the unit is based upon the valve package
chosen by the specifier for use in the unit. Aqua Bath recommends the use of a
than the use of a

4) Shower curtain - antibacterial, with hooks. 5) Seat belt. 6) Weighted shower curtain (patented), antibacterial, with hooks.

7) Dome light (factory drilled only, must be field installed and light shipped separately from unit).

8) ASTM F462 non-slip bottom. (*) When the ASTM F462 bottom is specified with the center drain location,
it will re-configure the trench drain system. A signed off approval is required for the bottom re-configuration.

glide bar / glide rail. 3) Pressure balance or thermostatic control valve.

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

Please check with your local city and
state for code compliancy. Aqua Bath's
advertised ADA compliant units are
based on our interpretation of the
Americans with Disabilities Act 1991
Guidelines. Field alterations or improper
installation could take the units out of
compliance. Aqua Bath accepts no

onsibility for final code compliance.

res

slide bar as an accessory in the unit rather

Modifications:

Received and / or approved by:

Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax [phone]

www.aquabath.com

02/09