Aqua Bath C6032TS-RS User Manual
T
F
Ribbed Bottom For
Slip Resistance
3½" I.D.
16"
32"
I.D.
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
9¾"
24" Grab Bar (Straight)
(2 Req'd)
Care Series
ADA Compliant
Submittal Data
C6032TS-RS
Top View - Left Hand Shown
1" Dia. S.S. Curtain Rod
10" W x 12" H (I.D.) Acrylic Soap Dish
Insert To Be Centered On Back Wall
Important Note:
Aqua Bath Recommends The Use Of A
Slide Bar As An Accessory In The Unit Rather
han The Use Of A Glide Bar / Glide Rail.
ADA Control Area
3½" I.D.
4" O.D.
18" Grab Bar
4"
(Max)
76"
18"
6"
84"
12"
9"
24" Grab Bar (2 Req'd)
83"
80"
36"
22"
18"
30"
30"
40"
15½"
55" I.D.
60" O.D.
32" I.D.
33" O.D.
ront View and Right Side View
Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used
Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.
The field installation instructions must be followed as directed or may void manufacturers warranty
Reference installation instructions for C6032TS.
.
C6032TS-RS
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
www.aquabath.com
02/09
CARE SERIES (Recessed Soap Dish)
p
• Model C6032TS-RS-L valve on left.
• Model C6032TS-RS-R valve on right.
• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.
• Meets ANSI A117.1, ADA Guidelines and other standards
for accessibility
• Acrylic one-piece molded construction simplifies installation.
• Inside dimensions: 55" W x 32" D x 78" H.
• Includes stainless steel grab bars with mounting plates
and curtain rod.
• Can be furnished complete with valve, hand held shower set,
curtain and hooks, waste and overflow and tub fill spout.
• Seat required to comply with ADA:
Seat Options
1) Lift out seat.
2) Factory installed fold-up seat.
• Vacuum-formed from .1875” one-piece sanitary grade acrylic.
• Manufacturing Tolerance Of (1/4”) Due To The Nature
Of The Materials Used.
Tub / Shower
The tub enclosure shall be Aqua Bath model C6032TS-RS acrylic and be molded from a single sheet so as not to have any joints
or seams, shall meet ANSI Z124.1. Shall meet ADA guidelines and other standards for accessibility. Unit shall have a backside
flame spread of less than 30 (Class B). Shall be designed to be ADA COMPLIANT and NAHB LISTED.
The enclosure shall have inside dimensions of 55" W x 32" D x 78" H and outside dimensions of 60" W x 33" D x 84" H.
An acrylic recessed soap dish insert shall be installed on the back wall with inside dimensions of 10” W x 12” H and outside
dimensions of 11½” W x 13½” H and shall be sealed from the backside to keep the unit waterproof.
The approximate weight of the unit shall be 275lbs.
Standard Accessories:
1) Two 24" (on back wall), two 24" (one on each end wall) and one 18” vertical, 1½" diameter 18 gauge stainless steel grab bars
with 1½" safety statute clearance, mounted with stainless steel bolts and secured from the rear with 3" x 3" x 11 gauge metal
mounting plates. 2) 1" diameter, 18 gauge stainless steel curtain rod. After grab bars and curtain rod have been factory installed,
they will be sealed from the backside making the unit completely waterproof. 3) Ribbed bottom for slip resistance (standard).
4) Two soap trays molded 52" above floor on back wall and one soap tray at dam level on center of back wall.
Available Accessories:
1) Seat required in ADA units; a) Removable lift out seat. b) Factory installed fold-up seat.
2) Hand held shower set (includes 60" flex hose, swivel connector, brass nipple, lock nut, wall outlet and vacuum breaker).
3) 24" slide bar, 30" slide bar or two (2) wall brackets installed on valve wall for use with hand held shower set.
Note: The determination of the use of slide bar or wall brackets to be installed in the unit is based upon the valve package
chosen by the specifier for use in the unit. Aqua Bath recommends the use of a
than the use of a
6) Shower curtain - antibacterial, with hooks. 7) Diverter spout.
9) Dome light, (factory drilled only, must be field installed & light shipped separately from unit).
glide bar / glide rail. 4) Pressure balance or thermostatic control valve. 5) Waste and overflow.
8) ASTM F462 non-slip bottom.
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Please check with your local city and
state for code compliancy. Aqua Bath's
advertised ADA compliant units are
based on our interpretation of the
Americans with Disabilities Act 1991
Guidelines. Field alterations or improper
installation could take the units out of
compliance. Aqua Bath accepts no
onsibility for final code compliance.
res
slide bar as an accessory in the unit rather
Modifications:
Received and / or approved by:
Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
www.aquabath.com
02/09
Loading...