Page 1
T
F
Ribbed Bottom For
Slip Resistance
36"
34" L-Shaped
Fold-Up Seat
18"
36" I.D.
I.D.
6¼"±
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Care Series
ADA Compliant
Submittal Data
Top View - Right Hand Shown
Important Note:
Aqua Bath Recommends The Use Of A
1" Dia. S.S. Curtain Rod
80"
76"
42"
2" Threshold
18" Grab Bar
31¾" x 15¾"
Grab Bar
20"
36" I.D.
41" O.D.
Slide Bar As An Accessory In The Unit Rather
han The Use Of A Glide Bar / Glide Rail.
C
L
18"
6"
36"
30"
84"
83"
48"
38"
2" Threshold
ront View and Right Side View
Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used
C4136TD-FUS 2"
ADA Control Area
18"
4"
36" I.D.
37" O.D.
Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.
The field installation instructions must be followed as directed or may void manufacturers warranty
.
Reference installation instructions for C4136TD-FUS 2".
To be ADA compliant, top of threshold can not exceed 1/2" above the finished floor material.
Page C-3
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
www.aquabath.com
10/08
Page 2
CARE SERIES
• Model C4136TD-FUS 2”-L valve on left.
• Model C4136TD-FUS 2”-R valve on right.
• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.
• Meets ANSI A117.1, ADA Guidelines and other standards
for accessibility
• Acrylic one-piece molded construction simplifies installation.
• Inside dimensions: 36” W x 36” D x 78” H.
• Can be furnished complete with valve, hand held shower set,
curtain and hooks.
• Barrier-Free Shower System, U.S . Patent No.6,178,571 B1.
• 2” threshold for pit detail installation.
• 3/4” threshold for top of slab installation.
• Factory installed fold-up seat full depth of stall.
• 18” vertical grab bar and 31¾” x 15¾” x 1½” wrap grab bar.
• Vacuum-formed from .1875” one-piece sanitary grade acrylic.
• Manufacturing Tolerance Of (±1/4”) Due To The Nature
Of The Materials Used.
Transfer Shower Stall
The shower enclosure shall be Aqua Bath model C4136TD-FUS 2” acrylic and be molded from a single sheet so as not to have
any joints or seams, shall meet ANSI Z124.2. Shall meet ADA guidelines and other standards for accessibility. Unit shall have a
backside flame spread of less than 30 (Class B). Shall be designed to be ADA COMPLIANT and NAHB LISTED.
The enclosure shall have inside dimensions of 36” W x 36” D x 78” H and outside dimensions of 41” W x 37” D x 84” H.
The approximate weight of the unit shall be 230lbs. The unit shall be formed with a patented recessed trench system so as to
direct water to the front drain. To be ADA compliant, top of threshold cannot exceed 1/2” above finished floor material.
Standard Accessories:
1) One 31¾” x 15¾” x 1½” diameter two wall horizontal wrap grab bar and one 18” vertical grab bar, fabricated from 18 gauge
stainless steel with 1½” safety statute clearance, mounted with stainless steel bolts and secured from the rear with 3” x 3” x 11
gauge metal mounting plates. 2) 34” "L" shaped phenolic fold-up seat. 3) 1” diameter, 18 gauge stainless steel curtain rod.
4) One wall bracket installed at 40” above floor in the center of back wall for hand held shower set.
After grab bars, fold-up seat, curtain rod and wall bracket have been factory installed, they will be sealed from the backside
making the unit completely waterproof. 5) Ribbed bottom for slip resistance (standard).
Available Accessories:
1) Hand held shower set (includes 60” flex hose, swivel connector, brass nipple, lock nut, wall outlet and vacuum breaker).
2) 24” slide bar, 30” slide bar or two (2) wall brackets installed on valve wall for use with hand held shower set.
Note: The determination of the use of slide bar or wall brackets to be installed in the unit is based upon the valve package
chosen by the specifier for use in the unit. Aqua Bath recommends the use of a slide bar
than the use of a glide bar / glide rail.
3) Pressure balance or thermostatic control valve. 4) Shower curtain - antibacterial, with hooks.
5) Weighted shower curtain (patented), antibacterial, with hooks. 6) Seat belt.
7) Dome light (factory drilled only, must be field installed and light shipped separately from unit).
8) ASTM F462 non-slip bottom. (*) When the ASTM F462 bottom is specified with the center drain location,
it will re-configure the trench drain system. A signed off approval is required for the bottom re-configuration.
Modifications:
Received and / or approved by:
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Please check with your local city and
state for code compliancy. Aqua Bath's
advertised ADA compliant units are
based on our interpretation of the
Americans with Disabilities Act 1991
Guidelines. Field alterations or improper
installation could take the units out of
compliance. Aqua Bath accepts no
responsibility for final code compliance.
as an accessory in the unit rather
Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
www.aquabath.com
10/08
Loading...