APW Wyott HR-31S, HR-50S, HRS-20S, HRS-31S, HRS-50S General Manual

A Standex Company

X*PERT™ Series HotRod® Roller Grill

Slanted Surface Roller Grill

MODELS: □ HR-20S □ HR-31S □ HR-50S

PRODUCT: QUANTITY: ITEM #:

MODELS: □ HRS-20S □ HRS-31S □ HRS-50S

Designed Smart

Equipment Packages to fit your Operations!

• Available in a variety of sizes to fit your counter space:

• Compact HR(S)-20S (10 rollers & 13” cooking surface across)

• Regular size HR(S)-31S (10 rollers & 19 ½” cooking surface

across)

• Full Menu Size HR(S)-50S (10 rollers & 30 ½” cooking surface

across

• Available in Chrome or “Tru-Turn” textured rollers.

• Unit is designed to be used in a “clerk served” operation or in a

customer “self-serve” merchandising plan. For counters between
clerk and customer, the Flat Roller Grill is available with reversible
“rear controls” and a “pass-through” sneeze guard.

Designed to Deliver Great Tasting Hot Dogs!

• Roller Grill heats quickly and has a fast recovery.

• Heating system has two cooking zones that can be turned to

Grilling temperatures for cooking Hot Dogs in less than 4 minutes*
and turned down to NSF-safe holding temperatures for serving
customers.

• HR(S)-20S slanted equipment can grill 306 Hot Dogs per hour.

• HR(S)-31S slanted equipment can grill 460 Hot Dogs per hour.

• HR(S)-50S slanted equipment can grill 765 Hot Dogs per hour.

*Grill times based on Pre-heated roller grill (about 10 minutes warm up cycle)

Easy to Operate and Maintain!

• “Easy to read” graphics and heavy duty knobs on the control panel

make it easier for employees to operate at the correct
temperatures.

• Infinite Control System gives operator the maximum ability to

adjust temperatures to a variety of hot dogs, sausage, egg roll, or
other roll type products.

• Roller Grill is designed to require minimal labor:

• “Tru-Turn” coated rollers just wipe clean with damp rag.

• Raised rollers allow cleaning in “hard to reach” areas.

• Removable grease collection pan is simple to clean.

• Easiest Roller Grill in the Industry to service:

• Unit is supplied with “easy to remove” side and bottom panels.

• Dependable, high torque motor is one of the most dependable in

the industry.

Design Features

• Exterior cabinet constructed of stainless steel for maximum

durability.

• “Tru-turn” coating is 30% thicker than competitive non-stick

coatings.

• Teflon seals at end of rollers stop grease from migrating into

motors and chains.

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226 Rev. 11/10/11bd
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

X*PERT™ Series

• New Patent Pending Bearing Design -Bearing is Larger, Wider

Radius, Tougher Material and has more surface contact area.
Provides more roller tube and metal gear sprocket support.
Eliminates wear, wobble and more than doubles overall bearing
life thus providing more years of dependable operation.

• Tru-Turn roller system enhancements include improved metal gear

sprockets, design improvements on the Self Aligning Chain
Guide/Tension System to provide noise free and smooth chain
operation along with eliminating chain slippage.

• Tru-Turn roller tube coating processes have been enhanced to

provide the thickest coating in the industry (measured by mil
thickness and over 30% greater than competitors units) which
provide years of better turning of products, ease of cleaning and a
better looking roller grill.

• Tru-Heat has been enhanced to provide more even heating across

the roller grill surface and maintain a temperature variance of less
than 7 degrees. Tru-Heat eliminates hot spots found in competitors
roller grills which over-heat products and greatly reduce product
hot hold time on the roller grill causing increased waste

Reliability backed by APW Wyott’s

Warranty

All APW Wyott HotRod Roller Grill equipment is backed by a 1-year
parts and labor warranty, including on-site service calls within 50
miles of authorized service technicians.

Model: HRS-31S Roller Grill with SGXP-31 Sneeze Guard

See reverse side for product specification

A Standex Company

X*PERT™ Series HotRod® Roller Grill

Slanted Surface Roller Grill

Construction:

Stainless steel exterior, aluminum drip pan and coated steel bottom.
Chrome or “Tru-Turn” textured rollers (specify Model HRS-20, -31
or -50 for “Tru-Turn”. Heavy duty high torque motor.

Shipping Weight:

HR(S)-20S: 35 lbs (15.9 kg)
HR(S)-31S: 44 lbs (19.1 kg)
HR(S)-50S : 55 lbs (25 kg)

FOB: Cheyenne WY 82007

Accessories & Options:

4” Metal Leg Kit
Reversible Controls (add R to model type)
Pass through Sneeze Guards
6” Tongs
Divider Kits
Polycarbonate Sneeze Guards
S=TruTurn coating on roller tubes
BW=Bun Warmer, heated bun drawer
BD=Unheated Bun drawer

R=Reverse controls on back of unit (available only on slant models)

W=Wide spacing for bigger products

Electrical Information:

120V units use a 5-15P plug. Both the 208V and 240V units
are provided with a 60” power cord with a Nema 6-15P plug
that exits from the bottom on the left rear corner.

HR(S)-20S: 120V, 768W, 6.4 Amps, 60Hz
HR(S)-31S: 120V, 985W, 8.3 Amps, 60Hz
208V/240V, 885/1160W, 3.2/4.8 Amps
220V, 990W, 4.5 Amps
HR(S)-50S: 120V, 1320W, 11 Amps, 60Hz
208/240V, 1260/1665W, 6.2/7 Amps

Overall Dimension:

HR(S)-20S: 11 ¾”H x 17 ¼”W x 18 5/8”D
(28.6 cm x 43.8 cm x 47.3 cm)
HR(S)-31S: 11 ¾”H x 23 ¾” W x 18 5/8”D
(28.6 cm x 88.3 cm x 47.3 cm)
HR(S)-50S: 11 ¾”H x 34 ¾”W x 29 9/16”D
(28.6 cm x 88.3 cm x 75.1 cm)

NOTE: 7/16” space between rollers.

*APW Wyott Reserves the right to modify specifications or
discontinue models without incurring obligation.

PRODUCT: QUANTITY: ITEM #:

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226 Rev. 11/10/11bd
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

MODELS: □ HR-20S □ HR-31S □ HR-50S

MODELS: □ HRS-20S □ HRS-31S □ HRS-50S