APW Wyott FW-2026D General Manual

Insulated Rectangular

Bottom Mount Hot Food Wells

PRODUCT: QUANTITY: ITEM #:

Designed Smart

• Heavy-duty bottom mount, Insulated Rectangular Hot
Food Well is designed for installation in metal countertop.

• Holds (2) 12x20 full size pans (6" deep) and also
accommodates (1) full sized (18" x 26") bun pan.

• The units feature complete UL listed construction
including electrical conduit, bezel and control box.

• All required adapters included.

• Unit is heated by two tubular calrod heat elements
shaped in serpentine fashion for even heat distribution
to pan base.

• Element mounted under well and secured by aluminized
reflector shield for maximum efficiency.

Models:  FW-2026  FW-2026D (“D” designates drain)

Insulated Bottom Mount Hot Food Well FW-2026

• Thermostatically controlled for fast heat recovery.

Built Solid

• Food well is constructed of Welded 20 ga., Type 304,
Stainless Steel Pan.

• Units shipped with drain are provided with stainless steel
1/2 NPT drain welded to bottom of pan and provided
with removable screen.

• Entire heat assembly covered with a layer of 1 1/2" thick
compressed fiberglass insulation fixed to bottom of pan
with threaded studs for easy service.

Reliability backed by APW Wyott’s Warranty

• All APW Wyott food wells are backed by a 1-year parts
and labor warranty, including on-site service calls within
50 miles of authorized service technicians.

• Certified by the following agencies:

APW Wyott Design Features

• Stainless steel drain coupling (unit with drain).

• Unit may be used WET or DRY (wet use offers best
results).

• Easy access to heating elements.

• Thermostatic control with 36" capillary (effective
length 26").

• Large indicating pilot light.

• Multiple units can be installed in same table or
counter.

Options

• Thermostat with 72” capillary (effective length 62”)

• Drain kit (56420)

• Lever operated shut off valve (56360)

See reverse side for product specifications.

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

Rev. 6/10/2005

Insulated Rectangular

Bottom Mount Hot Food Wells

PRODUCT: QUANTITY: ITEM #:

PRODUCT SPECIFICATIONS

Construction:

Well is constructed of welded 304 stainless steel,
with 28 ga., fully insulated aluminized steel outer
housing. Units shipped with drain are provided
with stainless steel 1/2" NPT drain welded to
bottom of pan provided with removable screen.
Unit is heated by a tubular calrod heat element
shaped in serpentine fashion for even heat
distribution to pan base. Element is mounted
under well and secured by aluminized reflector
shield for maximum efficiency. 1 1/2" thick
compressed fiberglass insulation.

13/16"flange

Recommended flange turndown 3/4"

Models:  FW-2026  FW-2026D (“D” designates drain)

Thermostatic control has 36" capillary
(effective length 26")

Electrical Specifications:

208/240V, 1200/1600W, 5.7/6.6 Amps

Overall Dimensions:

Outside: 8-3/16"H x 28" W x 21-3/4" D

(20.8cm x 71.1cm x 55.2cm)

Inside: 4"H x 26" W x 20" D

(10.1cm x 66cm x 50.8cm)

Cutout: 20.25" W x 26.5" L

(52.39cm x 68.26cm)

Control size: 6-1/4" W x 6-7/8"H

Control cutout: 5-3/4" W x 6-1/4" H

Shipping Information:

46 lbs. (21 kg)

F.O.B. / Dallas, TX 75226

*APW Wyott reserves the right to modify specifications or discontinue models without incurring obligation.

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
[phone] · [phone] · Fax [phone] · www.apwwyott.com· [e-mail]

Rev. 6/10/2005

# 1410